Views: 12 Author: Site Editor Publish Time: 2023-03-07 Origin: Site
Correct assembly and disassembly procedures are essential for ensuring the safety, efficiency, and long-term performance of any lighting truss system. Whether using bolt trusses or spigot trusses, following a consistent installation sequence helps reduce setup time while minimizing the risk of equipment damage or installation errors.
Although specific procedures vary depending on the truss design and event requirements, the basic workflow remains similar for most modular lighting truss systems.
Assembling and disassembling a lighting truss requires careful planning and attention to safety. Here are the general steps to follow for both assembly and disassembly:
Assembly:
Lay out all the truss sections, connectors, and accessories in the desired configuration.
Connect the truss sections together using the appropriate connectors, such as bolts or spigots. Make sure to tighten all bolts and connections securely.
Install the lighting fixtures onto the truss using clamps or other mounting hardware.
Use chain motors or hoists to lift the truss into position and secure it in place.
Disassembly:
Begin by detaching all the lighting fixtures from the truss and lowering them to the ground using chain motors or hoists.
Remove all the bolts and connectors from the truss sections, starting at the top and working your way down.
Carefully lower the truss sections to the ground using chain motors or hoists.
Disassemble any additional accessories or components, such as cable covers or corner blocks.
Tips for Safe Assembly and Disassembly:
Always wear appropriate safety equipment, such as hard hats and safety harnesses, when working with trusses.
Make sure that all bolts and connectors are tightened securely before lifting the truss into position.
Use chain motors or hoists to lift and lower the truss, and never attempt to lift the truss manually.
Make sure that the truss is properly secured in place before installing any lighting fixtures.
Follow the manufacturer's instructions and guidelines for assembly and disassembly.
Many truss-related problems occur because of incorrect installation practices rather than defects in the truss itself. Common mistakes include:
Mixing incompatible truss sections or connectors.
Failing to fully insert spigots or tighten bolts.
Uneven load distribution during lifting.
Installing lighting fixtures before the truss is properly secured.
Ignoring secondary safety devices such as safety cables.
Attempting to lift the structure manually instead of using appropriate hoisting equipment.
Following the manufacturer's instructions and verifying every connection before lifting greatly improves both safety and installation efficiency.
A properly assembled lighting truss provides a stable platform for lighting, LED displays, audio equipment, and other event production systems. Careful planning, qualified personnel, correct lifting equipment, and systematic inspections should be part of every installation and dismantling process.
For large-scale productions or custom truss systems, always perform structural checks and follow the recommended installation procedures provided by the manufacturer or project engineer.
How Do I Assemble and Disassemble a Lighting Truss?
https://www.dragontruss.com/How-do-I-assemble-and-disassemble-a-lighting-truss-id46994947.html
How to Install Aluminum Truss
https://www.dragontruss.com/How-to-install-aluminum-truss-id3058300.html
How to Hang Stage Truss
https://www.dragontruss.com/How-to-hang-stage-truss-id3192201.html
What Safety Precautions Should I Take When Using a Lighting Truss?
What Are the Different Accessories Available for a Lighting Truss?
A 6×9m aluminum A-frame tent provides a durable and weather-resistant temporary structure for exhibitions, weddings, commercial events, hospitality, and outdoor activities. Built with a high-strength 6061-T6 aluminum frame and professional PVC fabric, it offers long service life, quick installation, and modular expandability.
The MQ-G137 IP65 Battery Powered Wireless DMX LED Linear Wash Light is a professional outdoor lighting fixture designed for concerts, festivals, architectural lighting, wedding productions, rental companies, television studios, hotels, churches, and large-scale event installations. Available with 21 or 18 high-brightness 10W RGBWA+UV LEDs, it combines a built-in rechargeable battery, 2.4GHz Wireless DMX, and IP65 waterproof protection to deliver powerful linear wash lighting without the need for external power or signal cables.
Unlike traditional PAR fixtures, the MQ-G137 features a linear bar design, making it especially suitable for evenly illuminating walls, stage backdrops, trusses, scenic elements, and architectural façades. Its wide coverage, vibrant RGBWA+UV color mixing, and cable-free operation make it an excellent solution for both indoor and outdoor professional lighting applications.
For complete lighting system planning, explore our Stage Lighting resource center. The MQ-G137 also complements our Wash Lights, LED Par Lights, and professional Lighting Accessories.
4in1: 93X50X40CM 54KG
2in1:50x35x46cm 21KG
The MQ-G90 IP65 Battery Powered Wireless DMX LED Uplight is a professional rechargeable LED wash light designed for concerts, weddings, architectural lighting, churches, hotels, rental companies, exhibitions, and outdoor events. Equipped with 9 high-brightness 12W RGBWA+UV LEDs, a built-in rechargeable battery, 2.4GHz Wireless DMX, WiFi, and IP65 waterproof protection, it delivers powerful, uniform illumination while eliminating the need for power and signal cables.
Its multi-LED design creates smooth color blending and consistent wash coverage, making it particularly suitable for wall washing, venue decoration, stage backgrounds, architectural facades, and landscape lighting. Combined with flexible wireless control and durable outdoor construction, the MQ-G90 is an efficient lighting solution for professional event productions.
For complete lighting system planning, visit our Stage Lighting knowledge hub. The MQ-G90 works seamlessly alongside our LED Par Lights, Wash Lights, and professional Lighting Accessories.
The MQ-G40 IP65 Battery Powered Wireless DMX LED Uplight is a professional rechargeable lighting fixture engineered for weddings, concerts, festivals, architectural lighting, hotels, churches, rental companies, and outdoor events. Featuring four high-output 20W RGBWA+UV LEDs, a built-in rechargeable battery, 2.4GHz Wireless DMX, WiFi connectivity, and IP65 waterproof protection, it delivers exceptional flexibility for both indoor and outdoor lighting applications.
Designed for cable-free installation, the MQ-G40 eliminates the need for extensive power and signal wiring, making it ideal for temporary productions where quick setup and clean venue presentation are essential. Its rich RGBWA+UV color mixing and multiple control options allow lighting designers to create vibrant uplighting, wall washing, stage decoration, and architectural illumination with ease.
To explore more professional lighting solutions, visit our Stage Lighting knowledge hub. The MQ-G40 pairs perfectly with our LED Par Lights, Wash Lights, and professional Lighting Accessories
1 pack 6: 66X57X40CM 51kg
Customized 1 pack 6:96X65X41CM
64KG
The MQ-A202 LED Battery Powered Wireless DMX Moving Head Light is a compact and portable professional lighting fixture designed for mobile entertainment, rental companies, weddings, concerts, exhibitions, hotels, churches, and stage productions. Featuring a built-in 4800mAh rechargeable battery and integrated Wireless DMX512, it provides completely cable-free operation for fast installation and flexible lighting deployment.
Powered by a high-performance RGBW 4-in-1 LED light source with a service life of up to 50,000 hours, the MQ-A202 delivers vibrant color mixing, smooth movement, and reliable performance. Multiple control modes—including DMX512, Wireless DMX, Auto, Sound Active, and Master-Slave—allow the fixture to adapt easily to both professional lighting systems and standalone applications.
To learn more about professional lighting systems, visit our Stage Lighting resource center. The MQ-A202 is also an excellent companion to our Moving Lights, LED Par Lights, and professional Lighting Accessories.
4in1case
74X78X38CM 50KG
The MQ-A202 LED Battery Powered Wireless DMX Moving Head Light is a compact and portable professional lighting fixture designed for mobile entertainment, rental companies, weddings, concerts, exhibitions, hotels, churches, and stage productions. Featuring a built-in 4800mAh rechargeable battery and integrated Wireless DMX512, it provides completely cable-free operation for fast installation and flexible lighting deployment.
Powered by a high-performance RGBW 4-in-1 LED light source with a service life of up to 50,000 hours, the MQ-A202 delivers vibrant color mixing, smooth movement, and reliable performance. Multiple control modes—including DMX512, Wireless DMX, Auto, Sound Active, and Master-Slave—allow the fixture to adapt easily to both professional lighting systems and standalone applications.
To learn more about professional lighting systems, visit our Stage Lighting resource center. The MQ-A202 is also an excellent companion to our Moving Lights, LED Par Lights, and professional Lighting Accessories.
The MQ-A201 LED Battery Powered WDMX Mobile Bar Light is a compact all-in-one lighting fixture designed for mobile productions, concerts, weddings, clubs, exhibitions, churches, and rental companies. Equipped with a high-capacity 9600mAh rechargeable battery and built-in Wireless DMX (WDMX), it delivers complete cable-free operation while significantly reducing installation time.
The fixture integrates RGBW moving heads, kaleidoscope effects, wash lighting, green lasers, and high-power white strobe LEDs into one portable unit, allowing lighting designers to create dynamic visual effects from a single fixture. With multiple control modes including DMX512, WDMX, Sound Active, Auto Run, and Master-Slave operation, the MQ-A201 is suitable for both professional lighting engineers and mobile entertainers.
For customers planning complete lighting systems, our Stage Lighting knowledge hub introduces different lighting technologies and fixture types. This fixture also works well alongside our Moving Lights, LED Par Lights, and professional Lighting Accessories to build flexible event lighting systems.
Shelf Weight: 113X16X17CM
7KG 1pack 1carton
93x29x19cm 9KG
Discover the HKV Entertainment Speaker Series from Dragon Stage. Designed for karaoke rooms, bars, restaurants, clubs, lounges and commercial entertainment venues, the HKV Series delivers clear vocals, dynamic music reproduction and reliable performance in compact, stylish enclosures.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997
