With the development of the times, various materials and props began to appear in different occasions. The truss is a common industrial material pillar, and its main customized materials are aluminum alloys, which are widely used. The truss consists of a planar or spatial structure of a triangular unit composed of a straight bar assembly. The truss rod mainly withstand axial tensile or pressure, so the strength of the material is fully utilized. The products we have to introduce today areStage trussAnd will introduce the installation steps of the stage truss in detail in this article.
What is a stage truss?
How to build a stage truss in effect?
The importance of using a stage truss
What is a stage truss?
Stage truss is aluminum alloy truss, are widely used in performance, exhibition, event, background, lighting and sound suspension system. The principle of the truss is through the straight rod, there is a strong stability.
How to build a stage truss in effect?
· Determine the foundation
The first step in building a stage truss is to determine the basis. First, the four bases are placed on the coarse position on the floor and then adjust the lower feet below to make them on the horizontal surface.
· Insert the support column
Insert the bottom of the diagonal bracket into the four angles of the base, two of each angle, a total of 8. Secure the back to the base with a screw. Note that the direction of rotation of the side should be the same as shown in the figure.
· Install the floor
Fix the beam on the ground. The two ends of the beam are fixed on both sides of the two square sleeves to assemble the beams on the ground. The next step is to connect the flat cylindrical truss to complete the work.
The above is an introduction to the stage truss structure, which requires professional training. If the trust is very high, then we need to use a tiratory toolkit, which is usually built at the bottom and then lifted. In addition, we need to select a suitable cross section according to the materials used in the truss rod and the bracket to ensure the overall stiffness and stability of the stage truss and the strength and local stability of each rod to meet the requirements. Calculated internal force.
The importance of using a stage truss
The main role of the stage truss is mainly tolerate tensile or pressure, which can give full play to the role of materials, but also can save materials, but also reduce the weight of the structure. When designing a stage truss, we consider the stability of the structure, so collapse will not be collapsed due to sudden changes in balance. In short, successful performances will have a beautiful stage truss.
