20m×18m Ringlock stage + 12m high aluminum roof truss system with 2×10m side wings. Ultimate hybrid concert setup for LED walls & line arrays.
this is typical hybrid structure in our projects, you can check the case study of https://www.dragonstructure.com/20x18m-Hybrid-Ringlock-Stage-Structure-Breakdown-pd136302338.html

the total length is 5m, 2.6m deep and max height 1.2m and minum height 0.3m, aluminum sheet anti slip deck.
the price has included plastic seats, hand rails
check our case study on dragon structure about this structure https://www.dragonstructure.com/34-Person-Modular-Ringlock-Seating-Grandstand-Structure-pd101998238.html

The 24m × 24m x6m Aluminum Truss Tent Structure is a customized outdoor covering solution designed for terraces, resorts, beach areas, hospitality spaces, and temporary event applications. Based on the customer's requirements, this structure uses a 400mm aluminum screw truss system with a pyramid roof design, supported by 10 aluminum truss columns and covered with a white waterproof PVC tarpaulin. The open-span design provides a large covered outdoor area while maintaining a clean architectural appearance suitable for outdoor events and commercial spaces. DragonStage manufactures customized Aluminum Truss structures according to customer dimensions, application requirements, and project conditions.

Professional 12U and 16U flight case rack cabinet for mixers, amplifiers and event audio equipment. DragonStage provides customized rack cases for concerts, touring productions and professional events.

This customized large tunnel event structure combines a 24m wide × 18m deep × 15m high tunnel aluminum truss system with a 21.96m × 14.4m × 2m high stage platform. The upper structure uses multiple large curved aluminum truss arches connected by longitudinal truss sections, creating a wide-span architectural framework above the event area. The complete system can be supplied together with the elevated stage platform as a customized package for stadium events, ceremonies, concerts, festivals, and other large temporary productions. The dimensions shown here come from an actual customer quotation requirement rather than a standard catalogue size. DragonStage manufactures customized Roof Truss systems in different dimensions and configurations according to project requirements.

This customized 12m × 10m Ringlock concert stage system combines a 2m-high main stage, a 2m × 6m runway, four access stairs, three-sided Ringlock wall structures, approximately 4m-wide LED support areas on both sides, and a customized 400 × 400mm aluminum truss package above the stage.For other modular configurations, see our Ringlock Stage System

This 14m × 10m Ringlock concert stage system is a customized large-event stage package combining a steel Ringlock stage platform, aluminum peak roof truss, 6m-wide side structures for LED screens, and dedicated structures for line array suspension. The main performance platform measures 14m × 10m, with a requested stage height of up to 2m. Ringlock scaffolding is also used to build the surrounding support structures up to approximately 10m high, matching the main stage and the 6m-wide wings on both sides. Instead of purchasing the stage platform, roof truss, LED supports, and sound-support structures separately, customers can order them as one coordinated event-stage package from DragonTruss. For other modular stage configurations, see our Ringlock Stage System.

2m × 2m modular Ringlock audience viewing platform originally configured for socially distanced concert seating areas. The system features a 0.2m-high aluminum pallet platform, three-sided double-rail guardrails, an open rear entrance, adjustable steel base jacks, and a front-facing position for event or sponsor posters.

20m wide × 14m deep × 10m high custom curved roof truss system featuring six main support towers and two 2m-wide side wings for line array systems with manual hoists. Designed as a modular aluminum truss structure for concerts, festivals, live productions, and other large event applications.

This custom mobile DJ table is designed for a customer who needed one standalone DJ workstation rather than a complete stage system. The table uses the same basic manufacturing logic as a professional aluminum stage platform: an aluminum frame, flat black working surface, rigid support structure, and replaceable modular components. However, instead of stage legs standing directly on the floor, this version is fitted with four lockable caster wheels so the complete table can be moved short distances inside a club without dismantling the DJ equipment. The finished size is 2200mm wide × 800mm deep × 900mm high, providing a large working surface for multiple DJ players, a mixer, laptop, or controller. For other aluminum platform products manufactured using similar structural principles, see our Aluminum Stage range.

DragonTruss manufactures integrated stage and truss systems combining modular aluminum stage platforms with aluminum truss structures for event applications. This customized project includes a 9.76m x 9.76m Quick Stage main platform, a 2.44m wide x 3.66m long runway stage, and a 400x400mm spigot truss gantry structure with a 10m width and 5m height. The system integrates a quick assembly stage platform with a modular truss framework, providing a complete structure solution for event decoration, lighting installation, and potential LED screen applications. For customized stage structures combining platforms, truss systems, and accessories, DragonTruss provides complete Custom Stage Production services according to project requirements.

This custom black F34 curved truss arch structure was produced based on a customer's requested configuration, combining curved F34 truss elements, F32/F34 box corners, straight truss sections, and outdoor base plates. Unlike standard straight truss products, curved truss structures require additional manufacturing coordination, including curve fabrication, connector alignment, component matching, and surface finishing. The final structure demonstrates DragonTruss's capability in producing customized aluminum truss solutions beyond standard configurations. For projects requiring special shapes, customized layouts, or integrated stage structures, DragonTruss also provides Custom Stage Production services based on project requirements.

the spigot truss sectional sizes are 830mm wide and 630mm deep. the main tube is 50x4mm or 60x5mm.
This ultra-heavy-duty Aluminum Spigot Truss features reinforced 50x4mm and 60x5mm main tubes, engineered for massive spans and maximum load requirements. Ideal for professional concert and event stage builds, its high-precision spigot connection ensures rapid assembly and unrivaled structural stability for world-class productions.

U-frame Truss And Dolly, it is custom for 4  and 5 Robots.
the dolly is made of 1.2x0.6m aluminum plate, thickness 8mm and 4 casters.

The Square Box Truss F34 Circle Corner 2 Ways 90 Degree is characterized by its square shape and the incorporation of circular corners at two ends, forming a 90-degree angle. This design not only adds an aesthetic appeal to the structure but also enhances its structural integrity. The circular corners help distribute the load more evenly, reducing stress concentrations and improving the overall stability of the truss.

2.8m long, 50kg and max loading 10 tons
with aluminum wheels and adjustable slot for 5cm move

custom Aluminum Top Sections with Steel Wheels for Beam Truss 520x760mm are a popular choice for motor hoisting system due to their durability, strength, and versatility.

this is a African Outdoor Event Lighting Truss Frame used for rental, it is sizes are 10m long, 8m deep and 6m high.
 

This Aluminum Concert Professional Light Truss 18x12x9m seems is a high-quality and durable solution for concert and event lighting setups. The dimensions are suitable for large-scale productions, and the material is known for its strength and lightweight properties. This truss system appears is a reliable option for professional use in the entertainment industry.

the total sizes are 18m long, 8m wide and 8m high, the beam is 500x600mm spigot truss and pillar is 350x350mm.
this custom event stage truss has 4 pillars.

this custom 12m long and 6m beam truss is 389x389mm or 400x400mm
the pillar is 8m high, it is 290x290mm truss

16ft Diameter Circle Round Truss Portable for Event Lighting
the sectonal sizes are 290mm
spigot truss system

F34 Square Frame Circle Truss Package (4 x 90° Segments) - 3 Meters
Includes 4 x 90° curved box truss segments & connecting hardware

circles with diameter 1m,2m, 4m,6m,8m,12m 390:390 50*3mm

A truss circle with a diameter of 2 meters and sectional sizes of 290mm x 290mm, equipped with spigot connectors, is a structural element that offers a high level of strength and stability for various construction projects.

high-grade and lightweight aluminum which is easy for transportation and setup
Compatible with all sticks to create an astonishing and custom presentation

Width: 11.42in / 290mm
Height: 11.42in / 290mm
Main Tube: 2in / 50mm
Wall Thickness: .08in / 2mm
 
12.00"L x 12.00"D x 3.00"H
Shipping Weight: 6.00 lbs (2.8kg)

Heavy-duty aluminum swivel clamp for outrigger and tower support structures. Made from 6061 aluminum alloy, compatible with 48-52mm tubes, lightweight and durable for event truss, speaker tower and temporary structure applications.

F34 Square Frame Circle Truss Package (8 x 45° Segments) - 6 Meters
it is composed of 8 curved box truss segments with conical connectors to make a 6m (19.68 ft) circle trussing configuration. Constructed of high-grade aluminium

This is standard Long Outrigger for Aluminum Truss Tower Pillar Column
Usually it needs 4 pieces for a pillar
The Standard Long Outrigger is a critical structural component designed for reinforcing aluminum truss tower pillar columns in temporary or permanent installations. Engineered for stability and versatility, this outrigger ensures optimal load distribution and structural integrity when assembling aluminum truss systems for stages, canopies, lighting rigs, or industrial frameworks.