Views: 12 Author: Site Editor Publish Time: 2026-07-20 Origin: Site
Large outdoor concert stages often include dozens of large water tanks positioned around the base of temporary structures. At the same time, steel guy wires extend from the upper sections of the structure down toward these ballast points.
To many spectators, these water tanks appear to be simple counterweights.
In reality, they are part of a carefully engineered stability system.
Temporary event structures differ fundamentally from permanent buildings. They must be transported, assembled within a few days, safely withstand changing wind loads and production loads, and then be completely dismantled after the event.
Rather than relying on deep foundations, engineers combine ballast weight and tensioned guy wires to resist overturning while preserving the original venue.
During the construction of the 2026 Guangzhou Pearl Beer Festival Music Festival, we observed several practical engineering details that demonstrate how professional temporary structures achieve stability through the coordinated use of water ballast and guy wires.
These stability systems work together with the structural principles discussed in How Do Ringlock Structures Support Large Concert Stages? and the complete construction sequence described in How Is a Large Concert Main Stage Constructed?.
During construction, water ballast systems were installed around the Ringlock support structures and other temporary installations.
Several engineering details were observed.
Water tanks were positioned at the lowest level of the Ringlock structure.
The tanks were not placed directly on Ringlock ledgers.
Steel planks or modular stage platforms were installed beneath the tanks to distribute the load.
Most water tanks were equipped with integrated pallets and forklift pockets for transportation.
Guy wires were connected to the water ballast using two or more webbing slings rather than a single connection.
Guy wires were attached several metres below the top of the structure rather than directly at the highest point.
Although these details may appear simple, each reflects an important structural engineering principle.
One common question is why temporary event structures almost always use water ballast instead of concrete blocks.
The answer lies in transportation efficiency.
Concrete is heavy before transport, during transport and after installation.
Water ballast behaves differently.
The tanks are transported empty, positioned on site and then filled with water only after installation.
When the event is over, the tanks are emptied before being transported away.
This greatly reduces transportation weight while allowing engineers to create large counterweights exactly where they are needed.
For temporary structures that are repeatedly assembled and dismantled, water provides one of the most efficient ballast materials available.
A common misconception is that the water tanks alone prevent the structure from overturning.
In reality, stability is achieved through the combination of ballast weight and tensioned guy wires.
The ballast increases resistance against uplift and overturning.
The guy wires resist horizontal movement while transferring overturning forces into the ballast system.
Neither component can completely replace the other.
Instead, they function as one integrated stability system.
This engineering philosophy is also reflected throughout other temporary event structures discussed in Installation Methodology for Modular Stage, Truss & Scaffold Systems.
One of the most important observations during construction was that the water tanks were never placed directly on the Ringlock ledgers.
Instead, engineers first installed a supporting platform.
Depending on the project, this support may consist of:
Steel planks
Modular stage platforms
The purpose is not simply to provide a flat surface.
It is to distribute the concentrated load from the water tank over a much larger bearing area.
Ringlock ledgers are primarily designed to connect vertical standards and transfer structural loads through the scaffold system.
They are not intended to support highly concentrated loads from large ballast tanks resting directly on a small contact area.
Without proper load distribution, excessive local loading could deform or bend the ledgers.
By using steel planks or stage platforms, engineers spread the ballast weight across multiple structural members, reducing local stress and improving overall stability.
This follows the same load-distribution principle discussed in How Are Stadium Tracks Protected During Concert Construction?, where concentrated structural loads were distributed through multiple protective layers.
Another practical detail was the design of the water tanks themselves.
Professional ballast tanks are usually equipped with integrated pallets and forklift pockets.
This offers several advantages.
During installation, forklifts can quickly position the empty tanks before filling.
After the event, the tanks can be emptied and removed just as efficiently.
Without forklift access, repositioning large ballast tanks would require significantly more labour and time.
Although pallet design does not increase structural capacity, it greatly improves construction efficiency, logistics and site safety.
Temporary event engineering is not only about structural performance—it is also about installation efficiency.
The connection between the guy wires and the ballast system was another interesting observation.
Rather than using a single webbing sling, engineers connected the ballast using two or more slings.
This arrangement provides several advantages.
First, the load is distributed over a larger contact area.
Second, multiple slings create a more stable connection around the ballast tank, reducing the possibility of slipping during tensioning.
Third, additional slings provide practical flexibility when positioning shackles, tensioning devices and connection hardware.
In temporary structures, redundancy is often preferable to relying on a single connection point.
Although the water tank provides the counterweight, the guy wire is rarely connected directly to the tank itself.
Instead, engineers typically use webbing slings wrapped securely around the ballast before connecting:
Shackles
Turnbuckles
Steel wire ropes
This arrangement protects the tank from concentrated local forces while allowing the rigging system to be adjusted without damaging the ballast.
It also simplifies installation and removal.
Separating the structural connection from the ballast container improves both durability and operational efficiency.
During this project, the guy wires were attached several metres below the highest point of the Ringlock structure rather than directly at the top.
Although every project is different, this arrangement generally offers several engineering advantages.
The highest sections of temporary structures are often reserved for lighting equipment, speakers or other production elements.
Positioning the guy wire slightly lower helps avoid conflicts with these systems while transferring stabilising forces into stronger structural nodes.
It also reduces unnecessary bending effects near the very top of the structure.
The exact attachment location depends on structural calculations, equipment layout and project requirements, but it is rarely determined by convenience alone.
A stable temporary structure does not rely on a single component.
Instead, stability results from the interaction of multiple engineering systems.
Component |
Primary Function |
|---|---|
Water Ballast |
Provide counterweight against overturning |
Guy Wires |
Resist horizontal movement and transfer forces |
Steel Planks / Platforms |
Distribute ballast loads safely |
Webbing Slings |
Secure ballast while protecting connection points |
Forklift Pockets |
Improve transportation and installation efficiency |
Each component performs a different role, but together they create a complete temporary stability system.
Several practical engineering principles can be drawn from these observations.
Always distribute heavy ballast through suitable supporting members.
Empty water tanks are far easier to transport than permanent concrete ballast.
Water ballast and guy wires should always be considered together.
Forklift-compatible ballast tanks and modular rigging connections improve both efficiency and safety.
Using multiple webbing slings rather than a single connection provides better load distribution and greater operational flexibility.
The large water tanks surrounding modern concert stages are far more than simple counterweights.
Together with tensioned guy wires, they form an integrated stability system that enables temporary structures to safely resist overturning without permanent foundations.
During the construction of the 2026 Guangzhou Pearl Beer Festival Music Festival, several practical engineering details illustrated how this system works in practice.
Water ballast was transported efficiently, supported on properly distributed bearing surfaces, secured using multiple webbing slings and connected to carefully positioned guy wires.
Although largely unnoticed by audiences, these components play a critical role in the safety, efficiency and reliability of temporary event structures.
Modern concert engineering is not achieved through a single heavy counterweight, but through the careful coordination of weight, tension, load distribution and construction logistics.
Understanding these details reveals why professional temporary structures can remain both safe and remarkably efficient despite being designed to disappear as quickly as they are built.
DragonStage 6×4.5m (19.7×14.8ft) suspended rectangular lighting truss package, built from 290×290mm aluminum square truss with 50×3mm main tubes. The system includes eight 1-ton electric chain hoists with 25m lifting chains, an 8-channel motor controller, 25m power cables, fiber slings, shackles and individual motor transport cases. Designed for professional studio lighting, indoor concerts, exhibitions and event rigging applications, subject to project-specific structural and suspension verification.
DragonStage 4.5m diameter aluminum circular lighting truss system made from 290×290mm square truss with 50×3mm main tubes, supplied with six 1-ton electric chain hoists, 25m lifting chains, an 8-channel motor controller, fiber slings, shackles and motor transport cases. Designed for professional indoor event lighting installations, concerts, exhibitions and suspended circular rigging applications. Final suspension loads, attachment points and overhead support requirements must be verified for each installation.
DragonStage 12×12×6m modular aluminum A-frame roof truss system with two 2m-wide speaker wings, six main lifting towers and a PVC roof canopy. The configuration combines CS389×389mm main beams, CS289×289mm tower and roof trusses, CL30 ladder trusses, sleeve blocks, manual hoists and outrigger supports. Designed for outdoor concerts, festivals and temporary event productions requiring a covered truss framework with dedicated side speaker support positions.
DragonStage 4m wide × 3m high aluminum finish line truss gate with a 2m deep supporting base arrangement. Built from modular 290×290mm square truss sections and cube connectors, this sports event goal post truss is designed for triathlons, running races, cycling events and temporary start/finish line signage. The structure provides a framework for event banners and sponsor branding, with final banner attachments and ground stabilization requirements to be confirmed.
DragonStage 18×8m (59.1×26.2ft) modular Ringlock stage platform with a 2m (6.56ft) height and two access stair units. Featuring a large 144m² performance surface, modular Ringlock supporting framework, adjustable base supports and stair access, this stage system is designed for concerts, festivals, cultural performances and event production companies requiring a large elevated stage.
DragonStage 18m wide × 8m deep × 8m high aluminum curved roof truss stage system featuring CS520×760 main beams, 389×389mm truss pillars and 289×289mm roof top trusses. The illustrated configuration combines an arched canopy roof, four truss towers, a modular stage platform, two front access stairways and perimeter guardrails. Designed for outdoor concerts, festivals and temporary live performance installations, with project-specific structural and ground support requirements to be confirmed.
7m Aluminum H-Frame Line Array Speaker Support Tower for Outdoor Events
9m Modular Aluminum H-Frame Speaker Support Tower with Wheels and Outriggers
DragonStage 9m modular aluminum H-frame tower with 2m-long braced H-frame sections, horizontal connecting tubes, four outriggers, adjustable bases and 6-inch casters with adjustable legs. Designed as a customizable mobile-base support tower configuration for concert sound and event production applications. Speaker suspension, tower stability and movement procedures require project-specific verification.
DragonStage 10m circular aluminum lighting truss system assembled from 12 curved truss sections, each with a 30° arc. Featuring a 389×389mm square truss cross-section, 50×3mm main tubes and spigot connection accessories, this modular ring truss is designed for church lighting layouts, worship venues, concerts, exhibitions and indoor event productions. The nominal diameter and final suspension arrangement should be confirmed for the project.
DragonStage 10m wide × 10m deep × 4m high custom outdoor aluminum truss system with a ground-supported base plate configuration. Originally presented for a French village performance application, this modular truss structure is intended for temporary cultural events, community performances, festivals and outdoor event installations. Truss sections, connection methods and ground support arrangements are selected according to the final project requirements.
packing weight: 400kg
packing volume: 4cbm
DragonStage aluminum lighting boom arm and telescopic truss mounting accessory series for stage lighting installations. Available configurations include a 50–80cm adjustable arm, a 40cm horizontal boom section, a 50cm fixed boom arm and single-hook options. Designed for compatible truss and lighting support systems where adjustable fixture positioning or additional mounting locations are required.
The DragonStage Multi-Way Aluminum Truss Box Corner Cube is a modular junction component designed to connect compatible square aluminum truss sections in multiple directions.
Available in nominal 200×200mm, 300×300mm, 400×400mm, and 520×520mm truss system sizes, the connector can be supplied in 6061-T6 or 6082-T6 aluminum alloy, with Silver and Black finish options.
The standard 300mm version is specified as a 300×300×300mm cube. Six-direction connection arrangements and customized interfaces are available subject to the selected model.
Suitable for exhibition truss frames, lighting truss systems, display structures, and customized event truss configurations.
Connection compatibility must be confirmed before ordering. Spigot and bolt-nut connection systems are not automatically interchangeable.
DragonStage 290mm 6-Way Aluminum Truss Box Junction with 50×2mm main tubes, designed as a multi-directional connection component for compatible square truss systems. The six-way configuration provides connection positions for straight extensions, corners, T-junctions, cross-junctions and three-dimensional truss layouts. Final connector compatibility and hardware requirements must be confirmed for the selected truss series.
The DragonStage F34 Aluminum Truss Lectern Top Plate is a 3mm thick aluminum diamond-plate accessory designed for compatible 290mm F34 square truss lectern and pulpit assemblies.
With an approximate unit weight of 4.5kg (10lb), this metal top provides a practical surface for documents, notes, and suitable presentation accessories.
Ideal for church pulpits, conference lecterns, exhibition podiums, and custom aluminum truss furniture. This product is the top plate only, not a complete lectern. Plate dimensions and mounting compatibility should be confirmed before ordering.
The DragonStage Heavy Duty Adjustable Truss Boom Arm Bracket features an aluminum boom-arm assembly with clamp mounting, a stated total adjustable length of 50–80cm (19.7–31.5in), and a referenced 40cm (15.75in) horizontal arm dimension.
Designed for compatible stage lighting truss installations requiring an offset fixture mounting position, this model is available in Silver and Black finishes.
The original specification lists a 200kg loading figure. Its applicable extension length, mounting orientation, supporting truss conditions, and working load limit must be verified before use.
The DragonStage 50–80cm Adjustable Aluminum Truss Boom Arm is designed to provide an offset mounting position for stage lighting and compatible AV equipment on truss structures.
Featuring an adjustable aluminum boom-arm arrangement and clamp-style mounting hardware, it is available in Silver and Black finishes.
Suitable for stage lighting rigs, event truss systems, theaters, exhibitions, and temporary lighting installations. Clamp compatibility, permissible cantilever loading, and the exact adjustment geometry must be confirmed for the intended application.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage package with adjustable height from 0.6m to 1m. The system includes 50 aluminum-framed stage decks with 18mm anti-slip plywood surfaces, diagonal braces, adjustable supports, perimeter guardrail components and two 4-step access stairs. Designed for concerts, public performances, community events and rental companies requiring a large elevated stage with an integrated access and guardrail configuration.
DragonStage 40×40ft (12.2×12.2m) modular aluminum concert stage with a nominal 1m platform height, 50 plywood-surface stage decks, diagonal brace-supported framework, adjustable bases and two 4-step access stairs. Designed for concerts, festivals, public performances and event rental applications requiring a large elevated stage.
DragonStage 12m wide × 12m deep × 10m high concert stage roof truss system featuring a four-tower aluminum truss structure, pitched gable roof canopy, modular black stage platform, perimeter guardrails and access stairs. Designed for customized outdoor concerts, music festivals and live event stage installations.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage system assembled from 50 individual 4×8ft stage decks with plywood surfaces. Featuring diagonal stage braces, extendable support legs, adjustable bases and two access stair units, this large portable stage is available in several height configurations for concerts, festivals, community performances and temporary event productions.
DragonStage 14m wide × 14m deep × 10m high modular aluminum roof truss system featuring four main support towers, a multi-slope overhead truss framework, internal roof beams and tower base assemblies. Designed for customized concert, festival and temporary event roof structures. Stage platforms and roof coverings are not included in the illustrated configuration.
DragonStage steel mobile cable storage cart measuring 1080×650×850mm, featuring an open-top steel container, perforated side panels and a wheeled base. Designed for organizing, storing and transporting loose cables and accessories in event equipment warehouses, concert production facilities and rental operations.
DragonStage 8m Ringlock Line Array Tower for concert and outdoor event speaker support, featuring a sloped rain canopy with a 9m front height and 8m rear height, diagonal-braced scaffold framework and a bottom ballast platform. Designed as a customizable modular support structure for suspended line array systems
DragonStage modular FOH camera tower for concerts and live events, featuring two elevated working platforms, an 4m rear height and a maximum structural height of 5m. The tower incorporates diagonal bracing, a sloped roof canopy and rear screening panels to create dedicated elevated camera positions for event production crews.
16x10x8m Aluminum A-Frame Concert Roof Truss with 2m Side Wings and Stage
Compact two-step aluminum access platform featuring a welded 50×50×3mm square tube frame, 600mm step width, and two platform heights of 295mm and 590mm. Lightweight, reinforced, and customizable for backstage equipment access, maintenance facilities, and industrial applications.
DragonStage Aluminum Quick Stage Adjustable Legs are telescopic replacement and configuration legs designed for compatible Quick Stage platforms.
Available in both round and square tube versions, with four adjustable height ranges from 0.2–0.3m up to 1.0–1.5m, these legs allow the same modular stage system to be configured for different finished platform heights. The adjustable foot design also helps accommodate minor floor-level differences and sloping installation surfaces
The DragonStage 11x6x7m Covered Concert Roof Truss System combines an 11m-wide × 6m-deep × 7m-high main stage roof with two 2m side PA speaker wings.
The illustrated configuration features a pitched aluminum roof framework with a blue roof canopy, four main support towers, two independent speaker towers, and a matching modular stage platform with guardrails and dual stair access.
Designed for concerts, festivals, live performances, community events, and temporary outdoor productions requiring a coordinated stage roof and separate speaker-support positions.
The DragonStage 10x5x7m Aluminum Pitched Roof Truss System is a modular concert-stage structure featuring a 10m-wide × 5m-deep × 7m-high main roof frame with 2m side speaker wings on both sides.
The configuration combines a pitched aluminum roof-truss framework, four main support towers, two additional side speaker towers, and a matching modular stage platform as illustrated. It is designed for concerts, festivals, live performances, community events, and temporary stage productions requiring separate side positions for line-array or PA equipment.
The DragonStage 32x24x18m Large Ringlock Scaffold Roof Truss Structure combines a large modular Ringlock support system with a heavy-duty aluminum pitched-roof truss framework.
Designed for stadium-scale ceremonies, festivals, cultural performances and large outdoor event productions, the system integrates extensive scaffold support zones, heavy aluminum roof trusses, custom roof connectors, tensioning components and a large roof canopy.
The drawing identifies a nominal 32m × 24m × 18m configuration, with the overall height shown at approximately 18.21m.
A wide low-profile cable protector ramp designed for temporary event areas where power, audio or signal cables need to cross pedestrian routes.
The ramp measures 1270 × 900 × 60mm (50 × 35.4 × 2.36in) and provides multiple 46 × 46mm (1.81 × 1.81in) 20kg cable channels beneath a hinged yellow cover. Wide sloped side sections create a smoother crossing surface for pedestrians, carts and wheelchair users compared with conventional narrow cable protectors.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997
