DragonStage 6×4.5m (19.7×14.8ft) suspended rectangular lighting truss package, built from 290×290mm aluminum square truss with 50×3mm main tubes. The system includes eight 1-ton electric chain hoists with 25m lifting chains, an 8-channel motor controller, 25m power cables, fiber slings, shackles and individual motor transport cases. Designed for professional studio lighting, indoor concerts, exhibitions and event rigging applications, subject to project-specific structural and suspension verification.
| fea: | |
|---|---|
| Availability: | |
Dragon Stage
Item |
Specification |
|---|---|
Brand |
DragonStage |
Product Type |
Suspended Rectangular Lighting Truss Package |
Nominal Frame Dimensions |
6×4.5m / 19.7×14.8ft |
Truss Shape |
Rectangular |
Truss Cross Section |
290×290mm |
Main Tube Diameter / Thickness |
50×3mm |
Truss Material |
Aluminum Alloy |
Truss Connection System |
To Be Confirmed |
Electric Chain Hoists |
8 Units |
Rated Load per Motor |
1,000kg |
Chain Length per Motor |
25m |
Nominal Hoisting Speed |
4m/min |
Electrical Supply |
380V, 3-Phase, 50Hz |
Brake System |
Double Brake |
Load Chain |
G100 |
Stated Chain Safety Factor |
8:1 / 10:1; applicable specification to be confirmed |
Electrical Plug |
0.5m Lead, 4-Pin, 16A European-Type |
Motor Protection Rating |
IP54 |
Power Cable |
25m specified; final quantity to be confirmed |
Fiber Sling |
T4, 2 Ton, 3m |
Shackles |
Specified; quantity and rating to be confirmed |
Motor Flight Cases |
One Motor per Case |
Motor Controller |
One 8-Channel Controller |
Controller Case |
Handle Case |
Frame Working Load |
Subject to Structural Verification |
Overhead Suspension |
Requires Approved Support Arrangement |
The DragonStage 6×4.5m Aluminum Rectangular Lighting Truss System combines a modular box truss frame with eight electric chain hoists and related rigging equipment.
The rectangular frame uses 290×290mm aluminum square truss with 50×3mm main tubes.
The eight electric chain hoists have a specified individual rated load of 1,000kg, 25m lifting chains and a nominal lifting speed of 4m/min.
The package also includes one eight-channel motor controller, electrical cables, fiber slings, shackles and individual motor flight cases.
This system is intended for professional suspended lighting installations in studios, indoor event venues, concert halls and exhibition spaces.
Unlike a ground-supported truss frame, the rectangular structure is intended to be suspended from suitable overhead rigging points. The complete suspension arrangement must be verified for the intended installation.
The nominal rectangular layout measures 6m in length and 4.5m in width.
It creates four straight sides that can be used to organize lighting positions around a defined event area.
A rectangular lighting frame can be useful where the event layout follows straight stage, exhibition or studio boundaries.
The actual positions of lighting fixtures depend on the equipment specifications and approved attachment arrangement.
The structure uses 290×290mm aluminum square truss with 50×3mm main tubes.
Straight truss sections form the four sides, while compatible corner components connect them into the rectangular frame.
The exact segment lengths, corner connection system and joint specifications must be confirmed from the manufacturing drawing.
Customers considering compatible straight sections can explore DragonStage's 290mm Square Spigot Truss Product Range.
The linked product is a related truss reference, not confirmation that its connectors are interchangeable with this frame.
Eight electric chain hoists are specified for the package.
Each motor has a nominal rated load of 1,000kg.
The intended arrangement uses multiple lifting points for the rectangular framework.
However, the number of motors and their individual ratings do not establish the permissible load of the completed structure.
The final positions of the hoists must be determined from the actual rigging design.
For related lifting equipment, see DragonStage's 1000kg Electric Chain Hoist for Stage Truss Rigging.
The exact motor model and operating classification must be confirmed for the current package.
One eight-channel controller is included in the specified system.
With eight motors in the package, the controller provides the intended number of motor control channels.
Its exact functions depend on the supplied model.
An eight-channel controller does not automatically provide synchronized closed-loop positioning, individual load monitoring, overload protection or automated load balancing.
These capabilities should be confirmed separately.
For comparison, DragonStage offers Electric Chain Hoist Controller Products.
In addition to the truss and motors, the specified package includes fiber slings, shackles, electrical cables and transport cases.
These components support the supply and operation of the lifting equipment.
However, the correct sling arrangement, connection method and shackle ratings must be determined for the actual installation.
The accessory package should be checked against the final rigging drawing before production and delivery.
The frame uses two nominal 6m sides and two nominal 4.5m sides to form the rectangular layout.
The actual assembled dimensions depend on the truss section lengths and corner geometry.
The nominal perimeter of a 6×4.5m rectangle is 21m, but this is a geometric reference rather than a verified total truss cutting length.
The final manufacturing lengths should be based on the approved drawing.
The four corner joints connect the straight truss runs.
Their connection geometry is important because the frame must act as a coordinated structural assembly rather than four independent beams.
The final corner system must match the specified 290mm truss sections.
See DragonStage's Connection and Material System for general information about truss connection compatibility.
The main truss tubes are specified as 50mm in diameter and 3mm in wall thickness.
The complete section properties and allowable loads depend on the full truss geometry, alloy, welded construction and joint specification.
The rectangular truss is designed to be used as an overhead suspended framework.
It requires separate, suitable overhead support points and verified lifting connections.
The supporting building or venue structure is not included in the stated package.
Each motor is specified with a 1,000kg rated load.
This is an individual motor rating.
Eight 1-ton motors do not automatically provide an approved 8-ton lifting capacity for the complete rectangular frame.
The allowable suspended load depends on the frame, attachment geometry, hoist load sharing, supporting structure and applicable rigging requirements.
Each motor is specified with a 25m chain.
Actual usable travel depends on the hoist installation, required clearances and equipment configuration.
The listed nominal lifting speed is 4m/min.
This is the motor's specified speed and should not be interpreted as guaranteed synchronized movement of the complete eight-motor system under all conditions.
The hoists are specified for:
380V
Three-phase
50Hz
4-pin, 16A European-type connector
0.5m connector lead
The power distribution system and controller must be compatible with the motors and site supply.
The motors are described as having a double-brake configuration.
The specific brake mechanism, inspection requirements and documented performance must be verified from the final motor specification.
The specified hoist chain is G100.
The supplied motor information states 8:1 / 10:1 safety-factor options.
The applicable chain specification and rating basis must be confirmed for the exact model. This statement does not imply that the complete eight-motor suspension system has an 8:1 or 10:1 safety factor.
The motor is specified with an IP54 enclosure rating.
This rating relates to the motor enclosure and does not establish weather protection for the complete truss, electrical distribution and control equipment.
The specified package includes T4 fiber slings with a 2-ton rating and 3m length, together with shackles.
The sling rating must be interpreted according to the actual product documentation and hitch arrangement.
The required sling quantity, material, length and connection details must match the intended lifting plan.
For a related standardized product, customers can review the DragonEvent Polyester Truss Sling for Stage Rigging.
That accessory is a product reference; compatibility with the current system must be checked separately.
Multiple hoists can be incorporated into the lifting design of a rectangular truss structure.
The appropriate number and position of lifting points depend on the actual structural configuration and proposed equipment loads.
Eight hoists provide eight specified motor units, but the load carried by each unit will not necessarily be equal.
Potential differences may result from fixture placement, truss stiffness, rigging geometry and variations in the lifting system.
The final arrangement must also account for how the frame behaves during raising, lowering and stationary suspension.
For broader information about selecting structural layouts, see DragonStage's Truss Design and Configuration.
A rectangular overhead truss frame for studios and controlled indoor production spaces where lighting fixtures are arranged around a defined work area.
A suspended lighting framework for concert halls and indoor performance venues.
A rectangular truss arrangement for exhibition displays, trade show lighting and presentation areas.
A suspended lighting solution for product launches, conferences and corporate events requiring overhead equipment positions.
A modular truss and electric chain hoist package for rental companies supplying event production equipment.
For other modular event framework options, browse DragonStage's Event Truss Systems.
A rectangular truss provides straight mounting runs that can follow stage and exhibition layouts.
A circular truss uses a ring-shaped geometry and can produce a different lighting arrangement around a central space.
The choice depends on the available venue dimensions, visual design, lighting equipment and suspension requirements.
The supporting and lifting configurations must be assessed separately for each frame shape.
For a project using circular truss as part of a wider event structure, see DragonStructure's Hybrid Ringlock Concert Stage with Circular Truss and LED Support Structures.
This example illustrates an alternative structural layout, not an approved lifting arrangement for this rectangular product.
The specified controller has eight channels, matching the number of motors in the supplied package.
Each motor is packed separately in a flight case.
The controller is supplied with its own handle case.
This makes the individual motor units easier to organize as separate items during transportation and storage.
The final packing list should confirm the number of motor cases, cables, slings, shackles and accessory cases.
Customers considering different motor models may compare DragonStage's 1-Ton Electric Motor Chain Hoist.
The linked model is a separate product reference and should not be assumed identical to the supplied motor.
Before installation, the project team should verify the overhead support structure, approved attachment points, frame geometry and intended equipment arrangement.
The eight motors, rigging accessories and truss frame must be evaluated as a complete system.
The installed loads include the weight of the truss, lighting equipment, motors where applicable, and other suspended rigging components.
The intended lifting and lowering procedure must also be addressed by the rigging plan.
For more background on assembling temporary truss structures, see DragonStage's Installation Methodology for Modular Stage, Truss and Scaffold Systems.
The supplied product information confirms the nominal 6×4.5m rectangular truss, 290×290mm section, 50×3mm main tubes, eight 1-ton motors, 25m chains, 4m/min nominal lifting speed, eight-channel controller and listed accessories.
It does not establish the approved combined working load, permissible lifting-point positions, overhead support capacity, dynamic loading limits or certification of the complete suspended installation.
The motor ratings must not be added together to represent the allowable frame load.
The suspended structure requires project-specific structural and rigging verification.
We have a article to explain how to choose and use the studio truss system, you can check Why Truss Size Alone Is Not Enough for a Studio Rigging Quotation
What are the dimensions of the rectangular lighting truss?
The nominal frame measures 6m by 4.5m, approximately 19.7 by 14.8ft.
What truss section is used?
The frame uses 290×290mm aluminum square truss with 50×3mm main tubes.
How many electric chain hoists are included?
Eight electric chain hoists are specified.
What is the rated load of each motor?
Each motor has a stated rated load of 1,000kg.
Can the complete frame lift eight tons?
That cannot be concluded from the motor ratings. The complete allowable loading requires structural and rigging verification.
How long is the load chain?
Each motor has a specified 25m chain.
What is the lifting speed?
The nominal motor lifting speed is 4m/min.
What electrical power is required?
The motors are specified for 380V, three-phase, 50Hz power.
Does the system include a controller?
Yes. One eight-channel controller with a handle case is specified.
Are power cables included?
A 25m power cable specification is supplied. The final quantity and distribution configuration must be confirmed.
Are slings and shackles included?
They are listed as package accessories. Final quantities, dimensions and ratings should be confirmed.
Are motor flight cases included?
Yes. The specified packing arrangement is one motor per case, plus a controller case.
Does the system include the venue's overhead support truss?
No overhead building support structure has been identified as part of the specified package.
Can the frame dimensions be customized?
DragonStage can review alternative rectangular dimensions, truss specifications and motor package requirements.
DragonStage manufactures and supplies aluminum truss systems, electric chain hoists and event rigging equipment for professional event production companies.
For suspended rectangular lighting systems, we focus on matching the truss frame dimensions, motor specifications, connection equipment and intended project requirements.
We can review different truss sizes, motor quantities and accessory configurations according to the agreed supply scope.
Looking for a 6×4.5m rectangular lighting truss with eight electric chain hoists?
Contact DragonStage with your required truss dimensions, lighting equipment list, total suspended equipment weight, venue information and destination country.
Please also provide the available overhead support details and electrical supply information.
We can review the specified equipment package and prepare a quotation based on the agreed configuration.
Aluminum Ringlock Stage Platform for Large Outdoor Concerts in South America
Powder Coating Process for Aluminum Truss and Stage Components
How We Check Powder Coating Adhesion on Steel Ringlock Components: A Simple Cross-Cut and Tape Test
Steel vs Aluminum Powder Coating: Why Surface Treatment Depends on Material
Steel Ringlock / Layher-Type Structure Powder Coating Process
Curved and Flat LED Screen Stacking Support Frame (Dual-Purpose LED Display Support Structure)
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997
