Twin Ringlock LED Hanging Tower System with 6m 400mm Truss and Ballast Base

packing weight:2150kg

packing volume:5cbm

Product Information

Product Description

The DragonStage Twin Ringlock LED Hanging Tower System is designed for temporary event use where an LED display screen needs to be suspended between two independent support towers.

This structure is made of three main parts:

• one left ringlock support tower

• one right ringlock support tower

• one 6m long 400mm aluminum truss in the middle for LED hanging

The two side towers are the same in structure and size. Each tower has a total footprint of 4m wide × 4m deep and is divided into two sections:

• a front structure measuring 4m wide × 2m deep × 8m high

• a rear structure measuring 4m wide × 2m deep × 2m high

At the bottom of each tower, 4 ballast units are arranged to form the ballast base area. The middle span uses a 400mm aluminum truss with a length of 6m, which acts as the hanging beam for the LED screen.

This configuration is suitable for customers who need a temporary ringlock-based LED hanging system instead of a full roof stage or a simple ground-supported LED wall. For related systems, you can also review our Ringlock Structure System and Aluminum Truss pages.

Main Features

• Two identical ringlock load-bearing towers

• Each tower footprint is 4m × 4m

• Front section height reaches 8m

• Rear section height is 2m

• Middle span uses 6m long 400mm truss

• Designed for hanging LED display screens

• Bottom ballast arrangement with 4 ballast units per tower

• Suitable for temporary event and concert use

• Modular structure for easier transport and installation

• Can be customized for different LED sizes and span requirements

How This System Works

This product uses two side towers as the main support points. The LED screen is suspended in the middle by the 400mm connecting truss.

The deeper 4m tower footprint helps create a more practical temporary support layout. The front tall section provides the main support height, while the rear lower section helps form the back support and ballast area.

This makes the structure useful for event projects where the LED screen needs to be visually elevated and kept independent from the main stage.

Typical Applications

• Concert LED display support

• Festival LED hanging systems

• Outdoor event video-wall support

• Temporary ceremony LED screen support

• Sports-event screen support

• Rental LED structure systems

• Brand-event display structures

Important Note

This page describes the layout and product configuration based on the information currently provided:

• 2 identical ringlock towers

• each tower 4m wide × 4m deep

• front section 8m high

• rear section 2m high

• 4 ballast units at the bottom of each tower

• 6m long 400mm connecting truss

However, this page does not automatically confirm:

• allowable LED hanging weight

• wind rating

• ballast quantity calculation

• foundation requirement

• anchoring requirement

• engineering approval

• local compliance approval

If your project needs a quotation based on actual screen size, loading, and site condition, please also review our Engineering Solution and Safety Standards & Engineering Constraints pages.

Why Choose DragonStage

• Practical experience with temporary ringlock event structures

• Factory supply of ringlock systems, truss, and stage products

• Flexible support for customized LED hanging layouts

• Familiar with concert and event installation requirements

• Easy communication for project quotation and production

FAQ

What is this product mainly used for?
It is mainly used as a temporary LED hanging support system for concerts, festivals, and event display installations.

How many main parts does this system have?
It has three main parts: the left ringlock tower, the right ringlock tower, and the middle 6m 400mm truss.

Are the two side towers the same?
Yes. The left and right support towers are designed with the same structure and size.

What is the size of each ringlock tower?
Each tower has an overall footprint of 4m wide × 4m deep.

How tall is the main support section?
The front section of each tower is 8m high.

How tall is the rear section?
The rear support section is 2m high.

How long is the connecting truss?
The middle hanging beam is a 6m long 400mm aluminum truss.

What is placed at the bottom of the towers?
Each tower base includes 4 ballast units as part of the temporary support arrangement.

Can this structure be customized?
Yes. The tower size, truss span, and hanging layout can be adjusted according to the LED screen and project requirement.

Can this page be used as an engineering approval document?
No. This page is a product description page. Final engineering confirmation depends on the real project conditions and technical review.

Inquiry Suggestion

If you want us to quote a similar system, please send:

• LED screen width and height

• total LED weight

• indoor or outdoor use

• project location

• whether ballast or ground fixing is preferred

• any drawing, render, or site photo

That will help us prepare a more suitable quotation.