Views: 12 Author: Site Editor Publish Time: 2023-04-02 Origin: Site
Climbing scaffolding improperly is one of the most common causes of falls and injuries. Following correct access procedures helps protect workers and ensures that the scaffold system remains stable and safe.
For a complete overview of scaffold systems, please visit:
Scaffolding System
https://www.dragontruss.com/scaffolding.html
Before accessing the scaffold, make sure:
All components are properly assembled;
Braces and platforms are securely installed;
Guardrails are in place;
Casters are locked;
No damaged components are present.
Related article:
Scaffold Inspection Checklist: What to Check Before Use
https://www.dragontruss.com/Scaffold-Inspection-Checklist-What-to-Check-Before-Use-id43367577.html
Workers should use:
Internal ladders;
Vertical ladder systems;
Stairway scaffold systems.
Never climb:
Outside frames;
Guardrails;
Diagonal braces.
Related article:
What Is a Vertical Ladder Aluminum Scaffold Tower and When Should You Use It?
When climbing, always keep:
Two hands and one foot; or
Two feet and one hand
in contact with the ladder.
This "three-point contact" rule improves stability and reduces the risk of slipping.
Always:
Face the ladder;
Climb slowly;
Hold the rungs firmly.
Avoid:
Turning sideways;
Leaning backward;
Skipping rungs.
Tools and materials should be:
Lifted separately;
Carried with tool belts;
Raised using ropes or lifting devices.
Carrying heavy objects while climbing increases the risk of losing balance.
Recommended PPE includes:
Safety helmets;
Non-slip footwear;
Gloves;
Safety harnesses when required.
Avoid climbing scaffolding during:
Heavy rain;
Snow;
Strong winds;
Icy conditions.
Poor weather conditions can make surfaces slippery and reduce stability.
Related article:
10 Practical Tips for Using Aluminum Mobile Scaffolding Safely
Never exceed the load capacity specified by the manufacturer.
Excessive loads can:
Reduce stability;
Damage components;
Increase the risk of collapse.
Related article:
Aluminum Scaffolding Specifications: Size, Material and Load Capacity Guide
Different scaffold systems may have different:
Access methods;
Height limitations;
Stabilizer requirements;
Safety procedures.
Always follow the manufacturer's recommendations and local regulations.
Safe scaffold access begins with proper climbing practices. Using designated ladders, maintaining three points of contact, wearing appropriate PPE, and following safety procedures can significantly reduce the risk of falls and accidents.
Proper climbing habits are just as important as the scaffold structure itself in creating a safe working environment.
16U DJ Mixer Rack Flight Case – Standard & Anti-Shock Options
DragonStage 16U DJ mixer rack flight case available in standard non-anti-shock and anti-shock versions. Designed for DJs, professional audio technicians and event rental companies requiring rack-mounted equipment storage and a mixer rack configuration in one transport case. Internal dimensions, equipment depth and the protective construction of each version should be confirmed before ordering.
16U DJ Flight Case with Mixer Rack and Two Work Tables – Non-Anti-Shock
DragonStage 16U DJ flight case with an integrated mixer rack and two work tables. This standard non-anti-shock configuration combines rack-mounted audio equipment storage and an expanded DJ working area in one transportable case. Designed for mobile DJs, sound technicians, event rental companies and professional audio setups. Mixer dimensions, rack depth, table dimensions and case hardware should be confirmed before ordering.
16U DJ Flight Case with Mixer Rack and Work Table – Standard & Anti-Shock Options
DragonStage 16U DJ flight case with an integrated mixer rack and one work table, available in standard non-anti-shock and anti-shock configurations. The listed case dimensions are 530×680×750mm for the R16U product specification. Designed for DJs, audio rental companies and event technicians who need to organize rack-mounted audio equipment and a mixer workstation within one transport case. Equipment compatibility, usable interior space and the dimensions of each protective configuration must be confirmed before ordering.
DragonStage 6×4.5m (19.7×14.8ft) suspended rectangular lighting truss package, built from 290×290mm aluminum square truss with 50×3mm main tubes. The system includes eight 1-ton electric chain hoists with 25m lifting chains, an 8-channel motor controller, 25m power cables, fiber slings, shackles and individual motor transport cases. Designed for professional studio lighting, indoor concerts, exhibitions and event rigging applications, subject to project-specific structural and suspension verification.
DragonStage 4.5m diameter aluminum circular lighting truss system made from 290×290mm square truss with 50×3mm main tubes, supplied with six 1-ton electric chain hoists, 25m lifting chains, an 8-channel motor controller, fiber slings, shackles and motor transport cases. Designed for professional indoor event lighting installations, concerts, exhibitions and suspended circular rigging applications. Final suspension loads, attachment points and overhead support requirements must be verified for each installation.
DragonStage 12×12×6m modular aluminum A-frame roof truss system with two 2m-wide speaker wings, six main lifting towers and a PVC roof canopy. The configuration combines CS389×389mm main beams, CS289×289mm tower and roof trusses, CL30 ladder trusses, sleeve blocks, manual hoists and outrigger supports. Designed for outdoor concerts, festivals and temporary event productions requiring a covered truss framework with dedicated side speaker support positions.
DragonStage 4m wide × 3m high aluminum finish line truss gate with a 2m deep supporting base arrangement. Built from modular 290×290mm square truss sections and cube connectors, this sports event goal post truss is designed for triathlons, running races, cycling events and temporary start/finish line signage. The structure provides a framework for event banners and sponsor branding, with final banner attachments and ground stabilization requirements to be confirmed.
DragonStage 18×8m (59.1×26.2ft) modular Ringlock stage platform with a 2m (6.56ft) height and two access stair units. Featuring a large 144m² performance surface, modular Ringlock supporting framework, adjustable base supports and stair access, this stage system is designed for concerts, festivals, cultural performances and event production companies requiring a large elevated stage.
DragonStage 18m wide × 8m deep × 8m high aluminum curved roof truss stage system featuring CS520×760 main beams, 389×389mm truss pillars and 289×289mm roof top trusses. The illustrated configuration combines an arched canopy roof, four truss towers, a modular stage platform, two front access stairways and perimeter guardrails. Designed for outdoor concerts, festivals and temporary live performance installations, with project-specific structural and ground support requirements to be confirmed.
7m Aluminum H-Frame Line Array Speaker Support Tower for Outdoor Events
9m Modular Aluminum H-Frame Speaker Support Tower with Wheels and Outriggers
DragonStage 9m modular aluminum H-frame tower with 2m-long braced H-frame sections, horizontal connecting tubes, four outriggers, adjustable bases and 6-inch casters with adjustable legs. Designed as a customizable mobile-base support tower configuration for concert sound and event production applications. Speaker suspension, tower stability and movement procedures require project-specific verification.
DragonStage 10m circular aluminum lighting truss system assembled from 12 curved truss sections, each with a 30° arc. Featuring a 389×389mm square truss cross-section, 50×3mm main tubes and spigot connection accessories, this modular ring truss is designed for church lighting layouts, worship venues, concerts, exhibitions and indoor event productions. The nominal diameter and final suspension arrangement should be confirmed for the project.
DragonStage 10m wide × 10m deep × 4m high custom outdoor aluminum truss system with a ground-supported base plate configuration. Originally presented for a French village performance application, this modular truss structure is intended for temporary cultural events, community performances, festivals and outdoor event installations. Truss sections, connection methods and ground support arrangements are selected according to the final project requirements.
packing weight: 400kg
packing volume: 4cbm
DragonStage aluminum lighting boom arm and telescopic truss mounting accessory series for stage lighting installations. Available configurations include a 50–80cm adjustable arm, a 40cm horizontal boom section, a 50cm fixed boom arm and single-hook options. Designed for compatible truss and lighting support systems where adjustable fixture positioning or additional mounting locations are required.
The DragonStage Multi-Way Aluminum Truss Box Corner Cube is a modular junction component designed to connect compatible square aluminum truss sections in multiple directions.
Available in nominal 200×200mm, 300×300mm, 400×400mm, and 520×520mm truss system sizes, the connector can be supplied in 6061-T6 or 6082-T6 aluminum alloy, with Silver and Black finish options.
The standard 300mm version is specified as a 300×300×300mm cube. Six-direction connection arrangements and customized interfaces are available subject to the selected model.
Suitable for exhibition truss frames, lighting truss systems, display structures, and customized event truss configurations.
Connection compatibility must be confirmed before ordering. Spigot and bolt-nut connection systems are not automatically interchangeable.
DragonStage 290mm 6-Way Aluminum Truss Box Junction with 50×2mm main tubes, designed as a multi-directional connection component for compatible square truss systems. The six-way configuration provides connection positions for straight extensions, corners, T-junctions, cross-junctions and three-dimensional truss layouts. Final connector compatibility and hardware requirements must be confirmed for the selected truss series.
The DragonStage F34 Aluminum Truss Lectern Top Plate is a 3mm thick aluminum diamond-plate accessory designed for compatible 290mm F34 square truss lectern and pulpit assemblies.
With an approximate unit weight of 4.5kg (10lb), this metal top provides a practical surface for documents, notes, and suitable presentation accessories.
Ideal for church pulpits, conference lecterns, exhibition podiums, and custom aluminum truss furniture. This product is the top plate only, not a complete lectern. Plate dimensions and mounting compatibility should be confirmed before ordering.
The DragonStage Heavy Duty Adjustable Truss Boom Arm Bracket features an aluminum boom-arm assembly with clamp mounting, a stated total adjustable length of 50–80cm (19.7–31.5in), and a referenced 40cm (15.75in) horizontal arm dimension.
Designed for compatible stage lighting truss installations requiring an offset fixture mounting position, this model is available in Silver and Black finishes.
The original specification lists a 200kg loading figure. Its applicable extension length, mounting orientation, supporting truss conditions, and working load limit must be verified before use.
The DragonStage 50–80cm Adjustable Aluminum Truss Boom Arm is designed to provide an offset mounting position for stage lighting and compatible AV equipment on truss structures.
Featuring an adjustable aluminum boom-arm arrangement and clamp-style mounting hardware, it is available in Silver and Black finishes.
Suitable for stage lighting rigs, event truss systems, theaters, exhibitions, and temporary lighting installations. Clamp compatibility, permissible cantilever loading, and the exact adjustment geometry must be confirmed for the intended application.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage package with adjustable height from 0.6m to 1m. The system includes 50 aluminum-framed stage decks with 18mm anti-slip plywood surfaces, diagonal braces, adjustable supports, perimeter guardrail components and two 4-step access stairs. Designed for concerts, public performances, community events and rental companies requiring a large elevated stage with an integrated access and guardrail configuration.
DragonStage 40×40ft (12.2×12.2m) modular aluminum concert stage with a nominal 1m platform height, 50 plywood-surface stage decks, diagonal brace-supported framework, adjustable bases and two 4-step access stairs. Designed for concerts, festivals, public performances and event rental applications requiring a large elevated stage.
DragonStage 12m wide × 12m deep × 10m high concert stage roof truss system featuring a four-tower aluminum truss structure, pitched gable roof canopy, modular black stage platform, perimeter guardrails and access stairs. Designed for customized outdoor concerts, music festivals and live event stage installations.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage system assembled from 50 individual 4×8ft stage decks with plywood surfaces. Featuring diagonal stage braces, extendable support legs, adjustable bases and two access stair units, this large portable stage is available in several height configurations for concerts, festivals, community performances and temporary event productions.
DragonStage 14m wide × 14m deep × 10m high modular aluminum roof truss system featuring four main support towers, a multi-slope overhead truss framework, internal roof beams and tower base assemblies. Designed for customized concert, festival and temporary event roof structures. Stage platforms and roof coverings are not included in the illustrated configuration.
DragonStage steel mobile cable storage cart measuring 1080×650×850mm, featuring an open-top steel container, perforated side panels and a wheeled base. Designed for organizing, storing and transporting loose cables and accessories in event equipment warehouses, concert production facilities and rental operations.
DragonStage 8m Ringlock Line Array Tower for concert and outdoor event speaker support, featuring a sloped rain canopy with a 9m front height and 8m rear height, diagonal-braced scaffold framework and a bottom ballast platform. Designed as a customizable modular support structure for suspended line array systems
DragonStage modular FOH camera tower for concerts and live events, featuring two elevated working platforms, an 4m rear height and a maximum structural height of 5m. The tower incorporates diagonal bracing, a sloped roof canopy and rear screening panels to create dedicated elevated camera positions for event production crews.
16x10x8m Aluminum A-Frame Concert Roof Truss with 2m Side Wings and Stage
Compact two-step aluminum access platform featuring a welded 50×50×3mm square tube frame, 600mm step width, and two platform heights of 295mm and 590mm. Lightweight, reinforced, and customizable for backstage equipment access, maintenance facilities, and industrial applications.
DragonStage Aluminum Quick Stage Adjustable Legs are telescopic replacement and configuration legs designed for compatible Quick Stage platforms.
Available in both round and square tube versions, with four adjustable height ranges from 0.2–0.3m up to 1.0–1.5m, these legs allow the same modular stage system to be configured for different finished platform heights. The adjustable foot design also helps accommodate minor floor-level differences and sloping installation surfaces
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997
