Views: 0 Author: Site Editor Publish Time: 2021-06-02 Origin: Site
1) Before use, thoroughly check the scaffold that has been built to ensure that all assembly instructions are followed and that the parts of the scaffold are not damaged.
2) Only climb the scaffold when the scaffold has been leveled and all casters and adjusting legs have been fixed.
3) Do not move or adjust the scaffold when there are people or objects on the platform.
4) It can climb into the platform from the internal ladder of the scaffold, or climb into the ladder building ladder, or enter the working platform through the aisle of the frame, or enter the working platform through the opening of the platform.
5) If a vertical extension device is added to the base part, it must be fixed on the scaffold using an external support or a broadening tool.
6) When the platform height exceeds 1.20m, safety guardrail must be used.
7) Install and lock the tension reinforcement on the scaffold according to the instructions to enhance its stability.
8) When setting up, the brake of the wheel foot must be brake, and the level must be adjusted well.
9) The bayonet at the connection should ensure that the connection is stable.
10) ladders, platform boards and opening boards must be hooked well to hear the clicking sound.
11) When the platform plate of single-width scaffold exceeds 4m, and the platform plate height of double-width scaffold exceeds 6rn, external support plate must be used.
12) The vertical rod of the external support connection must be tightened, not loose, the lower end cannot be suspended, and the lower end should be close to the ground.
13) A horizontal support rod shall be used for every two oblique support rods.
14) The nut of the connecting buckle must be tightened, and the vertical rod and strengthening rod must be firmly stuck.
15) When the platform height is L5m, the reinforcing rod must be used.
16) When moving, the brake of the wheel foot shall be loosened, the lower end of the outer support shall be off the ground, and it is strictly prohibited to move when there are people on the scaffold.
17) It is strictly prohibited to use tools with strong impact.
18) Scaffolding is strictly prohibited to be used in strong winds and overload is strictly prohibited.
19) Scaffolding can only be used on solid ground (flat hard ground, concrete ground), etc. It is strictly prohibited to use on soft ground!
20) All operators must wear safety helmets and fasten safety belts when erecting, disassembling and using scaffolding.
Custom Aluminum Truss Tower Top Section with 4 Black POM Wheels – Hoist System Component
DragonStage custom aluminum top section featuring four black POM (polyoxymethylene) wheels for professional event truss tower hoist systems. Designed as an upper tower component for compatible lifting arrangements used in concert production, lighting truss installations and modular event structures. The product is described for Global Truss applications, but the actual tower interface, wheel geometry and hoist compatibility must be confirmed before ordering. Custom configurations can be reviewed according to project requirements.
Spigot Truss Tower Top Section for Electric Hoist – Plastic or Aluminum Wheels
DragonStage spigot truss tower top section designed for electric motor hoist applications in modular ground support systems. The original product specifies a base-frame arrangement for 289/290mm spigot truss pillars, with plastic or aluminum wheel options and three beam-size selections. Suitable for consideration in professional truss lifting tower assemblies, subject to verified component compatibility, pulley configuration and project-specific rigging requirements.
Plastic Truss Stacker & Spacer Clip – Truss Mounting Bracket for Storage and Transport
DragonStage plastic truss stacker, spacer clip and mounting bracket accessory for organizing compatible aluminum truss sections during storage and transportation. Designed for truss handling applications where suitable separation and positioning between truss members are required. Tube compatibility, clip dimensions, material specification and quantities must be confirmed before ordering. Not intended as a substitute for rated structural connections or overhead rigging clamps.
3m Diameter F34 Aluminum Circular Lighting Truss – 4×90° Ring Package
DragonStage 3m diameter F34 aluminum circular truss package, assembled from four 90° curved square truss sections. Each section features a CS289×289mm box truss profile with 50×3mm main tubes. Connecting hardware is included according to the original product specification. Designed for event lighting, exhibitions, stage decoration and custom circular truss installations. Final diameter reference, connector type, mounting arrangement and allowable loads must be confirmed for the intended application.
DragonStage 390×390mm aluminum circular spigot lighting truss with 50×3mm main tubes, available in nominal diameters of 1m, 2m, 4m, 6m, 8m and 12m. Options range from a one-piece 1m ring to larger multi-section circular assemblies. Designed for professional event lighting, exhibitions, stage productions and custom overhead lighting layouts. Segment counts vary by diameter; installation method, rigging points and permissible loads require project-specific verification.
3.66×2.44m Aluminum Quick Lock Portable Stage with 6 Decks, Adjustable Legs & Stairs
DragonStage 3.66×2.44m (12×8ft) modular quick-lock portable stage package assembled from six 1.22×1.22m (4×4ft) aluminum-framed stage decks with wooden tops. The original package lists 24 adjustable legs, stage leg connectors and two three-step stair units. Four adjustable stage height ranges are available: 0.2–0.3m, 0.4–0.6m, 0.6–1.0m and 1.0–1.5m. Final stair compatibility and accessories must be confirmed for the selected stage height.
16U DJ Mixer Rack Flight Case – Standard & Anti-Shock Options
DragonStage 16U DJ mixer rack flight case available in standard non-anti-shock and anti-shock versions. Designed for DJs, professional audio technicians and event rental companies requiring rack-mounted equipment storage and a mixer rack configuration in one transport case. Internal dimensions, equipment depth and the protective construction of each version should be confirmed before ordering.
16U DJ Flight Case with Mixer Rack and Two Work Tables – Non-Anti-Shock
DragonStage 16U DJ flight case with an integrated mixer rack and two work tables. This standard non-anti-shock configuration combines rack-mounted audio equipment storage and an expanded DJ working area in one transportable case. Designed for mobile DJs, sound technicians, event rental companies and professional audio setups. Mixer dimensions, rack depth, table dimensions and case hardware should be confirmed before ordering.
16U DJ Flight Case with Mixer Rack and Work Table – Standard & Anti-Shock Options
DragonStage 16U DJ flight case with an integrated mixer rack and one work table, available in standard non-anti-shock and anti-shock configurations. The listed case dimensions are 530×680×750mm for the R16U product specification. Designed for DJs, audio rental companies and event technicians who need to organize rack-mounted audio equipment and a mixer workstation within one transport case. Equipment compatibility, usable interior space and the dimensions of each protective configuration must be confirmed before ordering.
DragonStage 6×4.5m (19.7×14.8ft) suspended rectangular lighting truss package, built from 290×290mm aluminum square truss with 50×3mm main tubes. The system includes eight 1-ton electric chain hoists with 25m lifting chains, an 8-channel motor controller, 25m power cables, fiber slings, shackles and individual motor transport cases. Designed for professional studio lighting, indoor concerts, exhibitions and event rigging applications, subject to project-specific structural and suspension verification.
DragonStage 4.5m diameter aluminum circular lighting truss system made from 290×290mm square truss with 50×3mm main tubes, supplied with six 1-ton electric chain hoists, 25m lifting chains, an 8-channel motor controller, fiber slings, shackles and motor transport cases. Designed for professional indoor event lighting installations, concerts, exhibitions and suspended circular rigging applications. Final suspension loads, attachment points and overhead support requirements must be verified for each installation.
DragonStage 12×12×6m modular aluminum A-frame roof truss system with two 2m-wide speaker wings, six main lifting towers and a PVC roof canopy. The configuration combines CS389×389mm main beams, CS289×289mm tower and roof trusses, CL30 ladder trusses, sleeve blocks, manual hoists and outrigger supports. Designed for outdoor concerts, festivals and temporary event productions requiring a covered truss framework with dedicated side speaker support positions.
DragonStage 4m wide × 3m high aluminum finish line truss gate with a 2m deep supporting base arrangement. Built from modular 290×290mm square truss sections and cube connectors, this sports event goal post truss is designed for triathlons, running races, cycling events and temporary start/finish line signage. The structure provides a framework for event banners and sponsor branding, with final banner attachments and ground stabilization requirements to be confirmed.
DragonStage 18×8m (59.1×26.2ft) modular Ringlock stage platform with a 2m (6.56ft) height and two access stair units. Featuring a large 144m² performance surface, modular Ringlock supporting framework, adjustable base supports and stair access, this stage system is designed for concerts, festivals, cultural performances and event production companies requiring a large elevated stage.
DragonStage 18m wide × 8m deep × 8m high aluminum curved roof truss stage system featuring CS520×760 main beams, 389×389mm truss pillars and 289×289mm roof top trusses. The illustrated configuration combines an arched canopy roof, four truss towers, a modular stage platform, two front access stairways and perimeter guardrails. Designed for outdoor concerts, festivals and temporary live performance installations, with project-specific structural and ground support requirements to be confirmed.
7m Aluminum H-Frame Line Array Speaker Support Tower for Outdoor Events
9m Modular Aluminum H-Frame Speaker Support Tower with Wheels and Outriggers
DragonStage 9m modular aluminum H-frame tower with 2m-long braced H-frame sections, horizontal connecting tubes, four outriggers, adjustable bases and 6-inch casters with adjustable legs. Designed as a customizable mobile-base support tower configuration for concert sound and event production applications. Speaker suspension, tower stability and movement procedures require project-specific verification.
DragonStage 10m circular aluminum lighting truss system assembled from 12 curved truss sections, each with a 30° arc. Featuring a 389×389mm square truss cross-section, 50×3mm main tubes and spigot connection accessories, this modular ring truss is designed for church lighting layouts, worship venues, concerts, exhibitions and indoor event productions. The nominal diameter and final suspension arrangement should be confirmed for the project.
DragonStage 10m wide × 10m deep × 4m high custom outdoor aluminum truss system with a ground-supported base plate configuration. Originally presented for a French village performance application, this modular truss structure is intended for temporary cultural events, community performances, festivals and outdoor event installations. Truss sections, connection methods and ground support arrangements are selected according to the final project requirements.
packing weight: 400kg
packing volume: 4cbm
DragonStage aluminum lighting boom arm and telescopic truss mounting accessory series for stage lighting installations. Available configurations include a 50–80cm adjustable arm, a 40cm horizontal boom section, a 50cm fixed boom arm and single-hook options. Designed for compatible truss and lighting support systems where adjustable fixture positioning or additional mounting locations are required.
The DragonStage Multi-Way Aluminum Truss Box Corner Cube is a modular junction component designed to connect compatible square aluminum truss sections in multiple directions.
Available in nominal 200×200mm, 300×300mm, 400×400mm, and 520×520mm truss system sizes, the connector can be supplied in 6061-T6 or 6082-T6 aluminum alloy, with Silver and Black finish options.
The standard 300mm version is specified as a 300×300×300mm cube. Six-direction connection arrangements and customized interfaces are available subject to the selected model.
Suitable for exhibition truss frames, lighting truss systems, display structures, and customized event truss configurations.
Connection compatibility must be confirmed before ordering. Spigot and bolt-nut connection systems are not automatically interchangeable.
DragonStage 290mm 6-Way Aluminum Truss Box Junction with 50×2mm main tubes, designed as a multi-directional connection component for compatible square truss systems. The six-way configuration provides connection positions for straight extensions, corners, T-junctions, cross-junctions and three-dimensional truss layouts. Final connector compatibility and hardware requirements must be confirmed for the selected truss series.
The DragonStage F34 Aluminum Truss Lectern Top Plate is a 3mm thick aluminum diamond-plate accessory designed for compatible 290mm F34 square truss lectern and pulpit assemblies.
With an approximate unit weight of 4.5kg (10lb), this metal top provides a practical surface for documents, notes, and suitable presentation accessories.
Ideal for church pulpits, conference lecterns, exhibition podiums, and custom aluminum truss furniture. This product is the top plate only, not a complete lectern. Plate dimensions and mounting compatibility should be confirmed before ordering.
The DragonStage Heavy Duty Adjustable Truss Boom Arm Bracket features an aluminum boom-arm assembly with clamp mounting, a stated total adjustable length of 50–80cm (19.7–31.5in), and a referenced 40cm (15.75in) horizontal arm dimension.
Designed for compatible stage lighting truss installations requiring an offset fixture mounting position, this model is available in Silver and Black finishes.
The original specification lists a 200kg loading figure. Its applicable extension length, mounting orientation, supporting truss conditions, and working load limit must be verified before use.
The DragonStage 50–80cm Adjustable Aluminum Truss Boom Arm is designed to provide an offset mounting position for stage lighting and compatible AV equipment on truss structures.
Featuring an adjustable aluminum boom-arm arrangement and clamp-style mounting hardware, it is available in Silver and Black finishes.
Suitable for stage lighting rigs, event truss systems, theaters, exhibitions, and temporary lighting installations. Clamp compatibility, permissible cantilever loading, and the exact adjustment geometry must be confirmed for the intended application.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage package with adjustable height from 0.6m to 1m. The system includes 50 aluminum-framed stage decks with 18mm anti-slip plywood surfaces, diagonal braces, adjustable supports, perimeter guardrail components and two 4-step access stairs. Designed for concerts, public performances, community events and rental companies requiring a large elevated stage with an integrated access and guardrail configuration.
DragonStage 40×40ft (12.2×12.2m) modular aluminum concert stage with a nominal 1m platform height, 50 plywood-surface stage decks, diagonal brace-supported framework, adjustable bases and two 4-step access stairs. Designed for concerts, festivals, public performances and event rental applications requiring a large elevated stage.
DragonStage 12m wide × 12m deep × 10m high concert stage roof truss system featuring a four-tower aluminum truss structure, pitched gable roof canopy, modular black stage platform, perimeter guardrails and access stairs. Designed for customized outdoor concerts, music festivals and live event stage installations.
DragonStage 40×40ft (12.2×12.2m) modular aluminum stage system assembled from 50 individual 4×8ft stage decks with plywood surfaces. Featuring diagonal stage braces, extendable support legs, adjustable bases and two access stair units, this large portable stage is available in several height configurations for concerts, festivals, community performances and temporary event productions.
DragonStage 14m wide × 14m deep × 10m high modular aluminum roof truss system featuring four main support towers, a multi-slope overhead truss framework, internal roof beams and tower base assemblies. Designed for customized concert, festival and temporary event roof structures. Stage platforms and roof coverings are not included in the illustrated configuration.
DragonStage steel mobile cable storage cart measuring 1080×650×850mm, featuring an open-top steel container, perforated side panels and a wheeled base. Designed for organizing, storing and transporting loose cables and accessories in event equipment warehouses, concert production facilities and rental operations.
DragonStage 8m Ringlock Line Array Tower for concert and outdoor event speaker support, featuring a sloped rain canopy with a 9m front height and 8m rear height, diagonal-braced scaffold framework and a bottom ballast platform. Designed as a customizable modular support structure for suspended line array systems
DragonStage modular FOH camera tower for concerts and live events, featuring two elevated working platforms, an 4m rear height and a maximum structural height of 5m. The tower incorporates diagonal bracing, a sloped roof canopy and rear screening panels to create dedicated elevated camera positions for event production crews.
16x10x8m Aluminum A-Frame Concert Roof Truss with 2m Side Wings and Stage
Compact two-step aluminum access platform featuring a welded 50×50×3mm square tube frame, 600mm step width, and two platform heights of 295mm and 590mm. Lightweight, reinforced, and customizable for backstage equipment access, maintenance facilities, and industrial applications.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997
