This aluminum alloy lighting truss system is a 5m wide × 5m deep × 3m high (adjustable 2.7–3m) modular structure built with 290mm spigot truss, designed for supporting stage lighting, LED screens, and event equipment with high strength and flexible configuration.
packing weight:740kg
packing volume:5cbm
Item | Specification(squre truss) | Qty | ||||||
length | main tube(mm) | size(mm) | ||||||
5.00 m Beam(front) | 2 sets | 3.00 m | 50×3.0 | CS289×289 | 2pcs | |||
2.00 m | 50×3.0 | CS289×289 | 2pcs | |||||
1.00 m | 50×3.0 | CS289×289 | 0pcs | |||||
5.00 m Beam(side) | 2 sets | 3.00 m | 50×3.0 | CS289×289 | 2pcs | |||
2.00 m | 50×3.0 | CS289×289 | 2pcs | |||||
1.00 m | 50×3.0 | CS289×289 | 0pcs | |||||
2.00 m Pillar | 4 sets | 3.00 m | 50×3.0 | CS289×289 | 0pcs | |||
2.00 m | 50×3.0 | CS289×289 | 4pcs | |||||
1.00 m | 50×3.0 | CS289×289 | 0pcs | |||||
beam cube | 6 faces | CS289×289 | 0pcs | |||||
Frame Tower | Spigot Sleeve Block S | 4pcs | ||||||
Steel Base S | 4pcs | |||||||
Top Section S | 4pcs | |||||||
Manual hoist,BA05 2Tons | 4pcs | |||||||
Spigot Hinge Section,Height 1m | 4pcs | |||||||
Fibre sling,BA04,2 tons 3m | 4pcs | |||||||
Long outrigger | 16pcs | |||||||
This aluminum alloy lighting truss system is a standard modular event structure with a 5m (W) × 5m (D) footprint and adjustable height from 2.7m to 3m, built using 290mm spigot truss, one of the most widely used structural profiles in the event industry.
The 290mm truss size offers an optimal balance between load capacity and portability, making it suitable for small to medium-sized event setups. You can explore similar systems in lighting truss systems and standard spigot truss structures.
From an engineering standpoint, this configuration is commonly used due to its stable geometry and efficient load transfer. For deeper structural understanding, refer to load analysis for modular stage systems and structural engineering fundamentals.
The system follows a modular connection logic described in modular system design principles, allowing quick assembly using spigot and pin connections. Installation efficiency can be further understood in installation methodology guide.
This 5x5m truss structure is especially suitable for:
Small concert lighting rigs
Exhibition booth overhead structures
DJ and event lighting frames
LED screen support systems
For real-world applications, see concert & event stage solutions and exhibition booth solutions.
Material quality is critical for safety and long-term performance. Learn more from certified aluminum materials and 6061-T6 vs 6082-T6 aluminum comparison.
This truss system can also be combined with stage platforms to create a complete stage + lighting solution, widely used in event production.
Standard size: 5m × 5m footprint (ideal for modular event setups)
Adjustable height: 2.7m–3m for flexible rigging requirements
290mm spigot truss: industry-standard size for balance of strength and weight
Fast installation with pin & spigot connection
High load capacity for lighting and LED equipment
Suitable for indoor and outdoor events
The 290mm spigot truss system is widely used because:
It provides sufficient load capacity for lighting fixtures
It maintains structural stability over medium spans (5m typical)
It allows fast modular assembly with repeatable connections
For deeper technical understanding:
These factors directly influence safety, especially in dynamic event environments.
This 5x5m aluminum lighting truss system is commonly used in:
Concert stage lighting structures
Exhibition and trade show booths
DJ lighting frames and club setups
LED screen support structures
Temporary event rigging systems
Explore more in event truss applications and lighting truss use cases.
It is 5m wide × 5m deep × 3m high, with adjustable height from 2.7m to 3m.
This system uses 290mm spigot truss, a standard size for event lighting structures.
Yes, but structural safety depends on wind load and anchoring. Refer to safety standards for proper setup.
Looking for a standard 5x5m lighting truss system or custom size?
Browse more options in lighting truss products or contact us via contact page for a tailored solution.
Large Concert Speaker Lifting System Case Study – Truss Tower for Line Array System
Speaker Lifting System Price Guide (Crank Stand & Truss Tower Cost Breakdown)
How to Choose a Speaker Lifting System (Crank Stand vs Truss Tower Guide)
What is the Safe Height for a Speaker Lifting Tower? (Crank Stand & Truss Guide)
what is Aluminum speaker tower truss / line array aluminum truss tower?
LED Ground Support vs Hanging System: Which Truss System Is Better for Your Event?
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997