The DragonStage Channel Tent is a compact event tent developed for one very specific backstage requirement:
providing a covered passage from the preparation area to the main stage.
In many large concert projects, the main stage and backstage areas are surrounded by Ringlock structures. However, the route between the preparation area and the performance stage still needs to remain open for performers and technical staff.
Instead of continuing to fill this area with Ringlock components, a section of the structure can be intentionally left open.
A 4m wide × 6m deep Channel Tent is then positioned inside this opening.
The result is a simple circulation route:
Backstage / Preparation Area → Channel Tent → Main Stage
The tent provides roof protection and optional side enclosure while allowing people to move directly between the backstage area and the stage.
For other temporary event tent products, see our Tent range.
Item | Specification |
|---|---|
Product Type | Channel Tent / Backstage Access Tent |
Width | Approx. 4m |
Depth | Approx. 6m |
Overall Height | Approx. 3m |
Roof Type | Aluminum A-Frame |
Main Function | Covered Backstage-to-Stage Passage |
Installation Position | Inside or Between Larger Event Structures |
Typical Surrounding Structure | Ringlock Stage / Backstage Structure |
Roof Cover | Available |
Sidewalls | Available |
Custom Dimensions | Available |
Main Application | Concert / Festival / Stage Production |
Brand | DragonStage |
This Channel Tent was not developed by creating a completely new tent system.
DragonStage already manufactures a 4m × 9m Aluminum A-Frame Tent with Full Sidewalls:
4x9m Aluminum A-Frame Tent with Full Sidewalls
For this backstage application, the same basic tent concept can be modified from approximately 9m deep to 6m deep, allowing it to fit into the reserved passage within the larger event structure.
This is a practical way of handling customized event requirements.
The customer does not always need a completely new structure. Sometimes an existing product can simply be resized and adapted to a new application.
Customers looking for other temporary tent configurations can also see our Portable Tent products.
The Channel Tent is particularly useful when the surrounding stage or backstage system uses a modular Ringlock Structure System.
The idea is straightforward.
The Ringlock structure leaves a clear opening instead of placing standards, ledgers and braces through the circulation area.
The tent is installed inside that reserved space.
The Ringlock structure and Channel Tent remain two separate systems, but they are used together within the same event layout.
This also means the surrounding Ringlock structure is not automatically included when ordering the Channel Tent unless it is specifically listed in the quotation.
The distance between backstage and the main stage may only be several meters, but leaving this route completely exposed can still cause practical problems during an outdoor production.
The covered passage helps reduce direct exposure to rain when performers and staff move between backstage and the stage.
This can also be useful when moving:
Costumes
Musical instruments
Equipment cases
Electronic equipment
Props
Other event materials
Sidewalls can help prevent the audience from directly seeing performers waiting or moving behind the main stage.
This is particularly useful for concerts, ceremonies and shows where backstage movement should remain separate from the audience view.
Instead of allowing performers and crew to walk randomly through the surrounding scaffold structure, the tent creates a clearly recognizable passage between the two working areas.
Large event structures often contain cables, temporary equipment, structural components and technical working zones.
A dedicated covered channel can provide a simpler route through this environment.
The Channel Tent uses the same basic aluminum A-frame concept as DragonStage temporary event tents.
The pitched roof creates a simple covered corridor without requiring the entire passage to be constructed from scaffold and custom roof members.
Typical components may include:
Aluminum tent frame
A-frame roof members
Roof covering
Sidewalls
Connection components
Ground fixing or related accessories according to the final configuration
For other event tent configurations, see our Typical Tent products.
The Channel Tent does not have to use exactly the same enclosure arrangement for every project.
Possible configurations include:
Roof only
Roof + one sidewall
Roof + two sidewalls
Mostly enclosed passage
Open front and rear
Customized openings connecting directly with backstage and stage areas
For a backstage channel, two sidewalls are often useful when the customer wants both rain protection and visual separation.
The exact enclosure should be confirmed according to the actual stage layout.
The Channel Tent can be used for:
Concert backstage access
Festival backstage passages
Artist preparation areas
Performer entrance routes
Stage-side covered corridors
Technical staff passages
Costume and equipment movement
Temporary covered access between event structures
For broader concert and stage-system applications, see our Concert Event page.
The value of a Channel Tent is not that it is structurally complicated.
The useful part is that it solves a very specific event-layout problem without making the surrounding structure unnecessarily complicated.
A project may already contain:
Main Stage + Backstage Area + Ringlock Side Structure
but still have an exposed gap between the two.
Instead of building another special scaffold roof over that gap, an existing aluminum tent can be shortened and placed inside the opening.
In this case:
4m × 9m standard tent concept → modified to approximately 4m × 6m → used as backstage Channel Tent
This makes the product easier to understand, manufacture and replace than treating every backstage passage as a completely new structural system.
The 4m × 6m × approximately 3m configuration represents this particular Channel Tent requirement.
DragonStage can customize:
Tent width
Tent length
Overall height
A-frame roof dimensions
Roof covering
Number of sidewalls
Entrance position
Exit position
Wall openings
Cover color
Integration dimensions with existing structures
If the customer already has a stage or Ringlock layout, it is useful to provide the clear opening dimensions where the Channel Tent will be installed.
DragonStage can then determine whether an existing tent product can be modified to fit.
For a similar Channel Tent, please provide:
Required clear width
Required passage length
Required height
Existing Ringlock opening dimensions
Main stage position
Backstage position
Whether sidewalls are required
Whether the front or rear needs closing
Indoor or outdoor use
Installation location
Required quantity
Existing layout drawing or reference image
A simple stage layout showing where the channel sits between backstage and the main stage is usually more useful than providing the tent dimensions alone.
The Channel Tent described here is a temporary covered backstage passage.
This product description does not establish:
Wind resistance
Ballast requirements
Anchoring requirements
Fire classification of the covering
Emergency-exit compliance
Crowd-access compliance
Structural certification
Engineering approval
If these requirements apply to a particular project, they must be confirmed separately according to the installation location and intended use.
A Channel Tent is a compact covered passage used to connect a backstage or stage-side preparation area with the main performance stage.
This configuration is approximately 4m wide × 6m deep × 3m high.
Its purpose is to create a protected “channel” through or between larger event structures, allowing performers and staff to move from backstage to the main stage.
No. This configuration is adapted from DragonStage's existing 4m × 9m aluminum A-frame tent, shortened to approximately 6m deep for the specific backstage application.
Original product:
No. The surrounding Ringlock structure and the Channel Tent are separate products. The Ringlock layout leaves an opening, and the tent is installed inside the reserved passage area.
Yes. The Channel Tent can be supplied with different roof and sidewall configurations according to the required rain protection, privacy and access arrangement.
Yes. The 6m depth is one customized configuration. Other lengths can be manufactured according to the distance between backstage and the main stage.
Yes, it can be used for temporary outdoor event applications. The actual fixing, stabilization and environmental requirements must still be confirmed according to the installation site.
Manufacturer: DragonStage
Learn more about DragonStage:
https://www.dragontruss.com/dragon-stage-custom-aluminum-stage-truss-manufacturer-for-events.html
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997