The 2m × 2m Compact Hybrid Ringlock FOH Control Booth is a small temporary technical-control structure designed for event applications where only a limited working area is required.

The main booth uses a modular Ringlock structure, while the upper roof incorporates an aluminum roof component to form an A-frame / gable profile.

The confirmed dimensions are:

• Width: 2m

• Depth: 2m

• Side / eave height: 2m

• Roof ridge height: 3m

• Maximum overall height: 3m

Unlike a larger enclosed FOH tower, this configuration remains compact and relatively simple. The current BOQ includes the structural frame, working-floor planks, roof frame, roof tarpaulin and ballast-related steel pipes, but does not include side or front/rear curtain panels.

For other modular temporary structures, see our Ringlock Structure System.

Main Specifications

Compact 2m × 2m FOH Workspace

The booth provides a 2m × 2m working footprint.

This makes it suitable for projects that do not require a large multi-operator FOH structure.

Depending on the customer's equipment arrangement, the internal area may be used for:

• Audio control equipment

• Lighting console

• Video-control equipment

• Laptop and communication equipment

• Small event-production workstation

For larger productions, the dimensions can be expanded according to the number of operators and equipment required.

Modular Ringlock Main Frame

The main supporting structure uses Ringlock components.

According to the current BOQ, the Ringlock package includes:

• 4 × 2m vertical standards

• 4 × 2m horizontal ledgers

• 4 × 1.5m diagonal braces

The compact arrangement keeps the basic component list relatively simple and allows the booth to be dismantled into modular pieces for transport and repeated event use.

DragonStage can also manufacture larger Ringlock Stage System configurations for projects requiring larger platforms or more complex event structures.

2m High Sides with 3m Central Roof Ridge

This product uses a symmetrical pitched roof.

The two sides reach approximately:

2m high

while the center roof ridge reaches:

3m high

so the roof slopes downward from the central ridge toward both sides.

This creates the familiar A-frame / gable-roof profile shown in the product image.

For this product page, these dimensions describe the confirmed physical geometry only. They do not imply any specific drainage, snow, wind or roof-load performance.

Hybrid Aluminum Roof Component

The current BOQ includes:

1 × 2m aluminum roof beam

as part of the roof system.

This is why the product is described as a Ringlock + aluminum hybrid FOH booth, rather than a completely Ringlock-built structure.

DragonStage supplies aluminum structural components together with stage and scaffold systems for customized event projects. Related products can be found in our Aluminum Truss range.

The exact roof-frame component design should follow the final production drawing rather than being inferred only from the rendered image.

Roof Tarpaulin Included

The current product configuration includes:

11m² roof tarpaulin × 1 pc

to cover the A-frame roof.

No triangular tarpaulin panels are included in the current BOQ.

Similarly, the current configuration contains:

• 0 side curtains

• 0 front/rear curtains

so this product should be presented as a roof-covered open FOH booth, rather than a fully enclosed control room.

If a customer requires additional weather enclosure, side or rear curtain panels can be discussed separately.

Modular Working Floor

The BOQ includes:

7 platform planks, 0.2780m specification

for the internal working floor.

Seven planks placed across the approximately 2m width provide the basic platform surface for the FOH operating area.

The actual allowable working load is not specified in the information provided, so no load rating is claimed on this page.

If heavy consoles, equipment racks or other technical equipment will be installed, their dimensions and weights should be supplied before the final configuration is confirmed.

Ballast-Related Steel Pipe Components

The current BOQ also includes:

2 × 2m, 50×2mm steel ballast pipes with accessories

as part of the supplied configuration.

These components can be included in the manufacturing package, but their presence should not be interpreted as confirmation of a universal ballast requirement.

The actual stabilization requirement depends on the installation location, ground conditions, environmental conditions and final configuration.

packing weight: 180kg

packing volume: 1cbm

BOQ – Bill of Quantities

What Is Included in This FOH Package?

The confirmed supply package combines:

Ringlock main frame
+
diagonal braces
+
platform planks
+
aluminum roof component
+
A-frame roof tarpaulin
+
ballast-related steel pipe components

This is a compact ready-to-configure FOH structure rather than simply a set of scaffold tubes.

For event buyers who need stage, truss and technical structures supplied together, DragonStage can manufacture additional Stage Truss and related event components according to the same project requirement.

Typical Applications

This 2m × 2m FOH booth can be considered for:

• Small concerts

• DJ events

• Corporate events

• Festival technical areas

• Small audio-control positions

• Lighting-control positions

• Video-control positions

• Temporary production workstations

For complete concert and event applications, see our Concert Event page.

Custom Manufacturing Options

The 2m × 2m × 3m configuration shown here is one compact version.

DragonStage can customize:

• Booth width and depth

• Side height

• Roof ridge height

• Roof angle

• Floor configuration

• Ringlock component layout

• Roof-cover size

• Side curtains

• Rear curtain

• Entrance opening

• Equipment openings

• Cable routing

• Ballast-related accessories

For made-to-order event products, see our Custom Stage Production capability.

What Information Is Needed for Quotation?

For a similar compact FOH booth, please provide:

• Required width and depth

• Required side height

• Required maximum roof height

• Number of operators

• Audio, lighting or video equipment to be installed

• Whether side curtains are required

• Whether front/rear enclosure is required

• Indoor or outdoor use

• Installation location

• Ground condition

• Required quantity

• Drawing or reference image if available

For very small FOH structures, equipment dimensions are particularly useful because a 2m × 2m working space can become crowded quickly if large consoles or racks are installed.

Important Technical Note

The following information is confirmed for this product:

• 2m × 2m footprint

• 2m side/eave height

• 3m central ridge height

• Ringlock main structure

• Aluminum roof component

• Roof tarpaulin

• Modular platform floor

• Two ballast-related steel pipes

The available information does not establish:

• Floor load capacity

• Roof load capacity

• Wind resistance

• Required ballast weight

• Anchoring requirement

• Safety factor

• Structural certification

• Engineering approval

These requirements must be determined from the actual installation environment and final project configuration.

FAQ

What is the size of this FOH control booth?

The booth has a 2m × 2m footprint, with approximately 2m side height and a 3m maximum roof height.

What type of roof does it use?

It uses an A-frame / gable roof, with the roof rising from both 2m-high sides to a 3m-high central ridge.

Is this a Ringlock-only structure?

No. It is a hybrid product. The main booth uses Ringlock components, while the roof system includes an aluminum component.

Is the floor included?

Yes. The BOQ includes seven modular platform planks.

Are side curtains included?

No. Side curtains and front/rear curtains are not included in this particular configuration.

Is a roof cover included?

Yes. The BOQ includes one approximately 11m² roof tarpaulin.

Can the booth be fully enclosed?

Yes. Curtain panels or other enclosure requirements can be added as a customized option.

Is this suitable for a large FOH team?

This specific version has only a 2m × 2m working area and is better suited to compact technical-control requirements. Larger dimensions can be manufactured for multiple operators or larger consoles.