Item |
Specification |
|---|---|
Brand |
DragonStage |
Product Type |
Suspended Circular Lighting Truss and Motor Hoist Package |
Truss Shape |
Circular / Ring |
Nominal Diameter |
4.5m / 14.76ft |
Truss Cross Section |
290×290mm |
Main Tube |
50×3mm |
Truss Material |
Aluminum Alloy |
Electric Chain Hoists |
6 Units |
Hoist Brand |
DragonStage |
Rated Load per Motor |
1,000kg / 1 Ton |
Hoist Chain Length |
25m |
Hoisting Speed |
4m/min |
Power Supply |
380V, 3-Phase, 50Hz |
Brake System |
Double Brake |
Load Chain |
G100 |
Stated Chain Safety Factor |
8:1 / 10:1, subject to applicable specification |
Electrical Plug |
0.5m, 4-Pin, 16A European-Type Plug |
Hoist Protection Rating |
IP54 |
Power Cable |
25m, as specified |
Fiber Sling |
T4, 2 Ton, 3m |
Shackle |
Included in specified accessory list |
Motor Transport Case |
1 Motor per Case |
Motor Controller |
1 Unit, 8-Channel, with Handle Case |
Final Truss Working Load |
Subject to Engineering Verification |
Approved Suspension Arrangement |
Project-Specific |
The DragonStage 4.5m Circular Lighting Truss Package combines a modular aluminum ring truss with six electric chain hoists and associated rigging accessories.
The circular truss has a nominal diameter of 4.5m (14.76ft), with a 290×290mm square truss section and 50×3mm main tubes.
Six 1-ton electric chain hoists are specified for the lifting arrangement. Each motor is equipped with a 25m load chain and operates at a stated lifting speed of 4m/min.
The package also includes an eight-channel motor controller, power cables, fiber slings, shackles and individual motor transport cases.
This configuration is intended for professional event rigging applications where a circular lighting structure is raised and suspended from a separately verified overhead support system.
The complete arrangement must be evaluated according to the actual truss configuration, suspension geometry, lifting equipment and proposed suspended loads.
A circular truss creates a continuous-looking ring above the event floor.
Unlike a conventional rectangular lighting frame, a circular arrangement distributes fixture positions around a curved perimeter.
This geometry is often selected for exhibition halls, concert venues, product launches, corporate events and central lighting installations.
For a larger alternative, see DragonStage's 8m Diameter Aluminum Circle Truss System.
The appropriate diameter depends on the available venue space, lighting layout and support requirements.
The circular structure uses a nominal 290×290mm truss section with 50×3mm main tubes.
The curved sections form the ring geometry, while compatible joints connect the sections into the required circular assembly.
The final number of segments, connection method and joint details must be confirmed from the manufacturing drawing.
The 290mm dimension describes the cross section, not the diameter of the complete ring.
Six electric chain hoists are specified for the proposed six-point lifting arrangement.
Each hoist has a stated rated load of 1,000kg.
The individual motor specification includes a 25m chain, 4m/min lifting speed and double-brake configuration.
The six motors must be considered together with the geometry of the suspended ring and the supporting structure.
Six 1-ton hoists must not be interpreted as automatic approval for a 6-ton total suspended load.
Actual load distribution can change with the position of lighting fixtures, rigging equipment, lifting tolerances and the geometry of the suspension points.
For related motor specifications, see DragonStage's 1000kg Electric Chain Hoist for Stage Truss and Speaker Rigging.
The linked hoist is a related product reference; its configuration and rating should be checked against the motors supplied in this package.
The package specifies one eight-channel motor controller with a transport case and handle.
The controller provides a control interface for multiple hoist motors.
Six motors are included in the specified package, while the controller has eight channels.
This does not by itself confirm automated load balancing, synchronized closed-loop motion, positioning accuracy or compatibility with additional motors.
Those functions depend on the actual controller model and control system specification.
Customers may also review DragonStage's Electric Chain Hoist Controller Products.
The package specifies one transport case per motor.
Separate cases help organize equipment during storage and transport.
They are particularly useful for event rental operations where motors and accessories must be checked before and after each production.
The original package describes one motor per case and an additional handle case for the controller.
Exact case dimensions, weights and internal packing arrangements should be confirmed.
Each electric chain hoist is specified with a 1,000kg rated load.
This is a motor-level specification and must not be substituted for the complete truss system's working load.
The specified load chain length is 25m per motor.
The required lifting travel and installed chain arrangement must be checked against the actual venue height and hoist configuration.
The stated lifting speed is 4m/min.
This is the motor's nominal specification and should not be treated as the guaranteed travel rate of the complete multi-hoist system under every operating condition.
The specified power supply is:
380V
Three-phase
50Hz
4-pin, 16A European-type plug with 0.5m lead
The electrical distribution and control equipment must be suitable for the supplied motors and installation environment.
The motors are specified with a double-brake configuration.
The exact brake design, inspection requirements and applicable performance documentation should be confirmed from the final equipment specification.
The motors are specified with G100 load chains.
The supplied specification states 8:1 / 10:1 safety-factor options.
The applicable factor and the basis for this rating must be confirmed for the exact motor and chain configuration.
A chain specification alone does not establish the certification or allowable load of the complete suspended installation.
The motors are specified with an IP54 enclosure protection rating.
This relates to the rated enclosure protection of the motor equipment.
It does not mean that the complete truss system, electrical connectors, distribution equipment and control accessories can be exposed to unrestricted outdoor conditions.
The package specifies T4 fiber slings rated at 2 tons and 3m in length.
The final sling material, construction, configuration and quantity should be confirmed in the supply list.
Sling working-load limits depend on the applicable hitch arrangement and product documentation.
For a related standardized accessory, see the DragonEvent Polyester Truss Sling for Stage Rigging.
Shackles are listed as package accessories.
The specific quantity, dimensions, working-load limit and connection compatibility must be established before installation.
25m power cables are specified for the system.
The final cable quantities, connector type and distribution arrangement should match the actual six-motor installation and controller specification.
Each motor is packed in an individual case.
A separate handle case is specified for the controller.
A six-point motor arrangement uses six designated lifting locations around the ring truss.
The intended purpose is to provide a lifting arrangement for the suspended circular framework.
However, the actual hoist locations must be determined from the approved rigging design.
The suspension points should not be placed by simply dividing the circumference into equal segments without verifying the structural response.
The design must account for the curved truss sections, truss joints, suspended fixtures, motor and rigging equipment, and actual overhead attachment locations.
The system must also be assessed for uneven load distribution and changes in loading during lifting or lowering.
For further structural context, DragonStage provides information on Truss Design and Configuration.
A rectangular lighting truss is commonly used where lighting positions follow straight stage or exhibition boundaries.
A circular truss creates a ring arrangement and can support a different visual and lighting layout.
The selection should depend on the event concept, fixture arrangement, available overhead attachment points and engineering assessment.
A circular ring also requires careful attention to connection geometry and lifting configuration.
For general component information, see DragonStage's Connection and Material System.
A suspended circular lighting framework for concert halls and entertainment venues where the overhead structure is suitable for the intended rigging arrangement.
A circular overhead feature for trade shows, exhibition stands and large display areas.
A central ring lighting installation for presentation spaces, product launches and corporate events.
A reusable circular truss and motor package for rental inventories requiring modular lighting structures and electric hoist equipment.
A circular truss configuration that can be considered for specialized event production layouts.
For an example of circular truss integrated into a larger event structure, see DragonStructure's Hybrid Ringlock Concert Stage with Runway, LED Support Walls and Circular Truss.
That project is a different structural arrangement and should not be treated as proof of capacity or compatibility for the present package.
For a circular truss lifting package, the following details are important:
Truss configuration: Confirm the nominal diameter reference, actual truss section dimensions, number of curved segments and connection hardware.
Suspension points: Confirm the intended six hoist connection locations and compatible rigging hardware.
Lighting equipment: Provide a fixture list including the quantities, individual weights and intended mounting locations.
Overhead support: Confirm the building or venue attachment positions and their approved loading.
Electrical supply: Verify the available voltage, frequency, connector requirements and controller compatibility.
Operational requirements: Confirm the intended lifting procedure, operating conditions and applicable rigging documentation.
For broader installation principles, refer to DragonStage's Installation Methodology for Modular Stage, Truss and Scaffold Systems.
The 4.5m ring can be compared with other sizes and configurations based on the event's visual and technical requirements.
A different product with rotational functionality is available in DragonStage's 1.5m Rotating Circular Truss System.
This is a separate product type. The 4.5m six-hoist package described here is not specified as a rotating truss system.
The supplied information confirms a nominal 4.5m circular truss, 290×290mm cross section, 50×3mm main tubes, six 1-ton electric chain hoists, 25m chains, an eight-channel controller and the listed rigging accessories.
It does not establish the allowable load of the completed ring, approved hoist positions, capacity of the building's overhead attachment points, permissible dynamic loads or certification of the complete installation.
The motor rating, chain specification, sling rating and controller channel count must not be combined to infer an overall permissible suspended load.
The final installation requires a verified rigging and structural plan appropriate to the venue and intended equipment.
if you want to learn more information and knowledges about studio rigging trusses, you can check our website article Why Truss Size Alone Is Not Enough for a Studio Rigging Quotation
What is the diameter of the circular lighting truss?
The nominal diameter is 4.5m, approximately 14.76ft.
What truss section is used?
The circular ring uses 290×290mm aluminum square truss with 50×3mm main tubes.
How many electric chain hoists are included?
Six electric chain hoists are specified.
What is the capacity of each motor?
Each motor is specified with a rated load of 1,000kg.
Does six 1-ton motors mean the whole truss can carry 6 tons?
No. The complete system's allowable suspended load depends on structural verification, attachment points and actual load distribution.
How long is each motor chain?
The specified chain length is 25m.
What is the hoisting speed?
The specified nominal lifting speed is 4m/min.
What electrical supply is required?
The specified motors require 380V, three-phase, 50Hz power.
Is a motor controller included?
Yes. One eight-channel controller with a handle case is specified.
Are fiber slings and shackles included?
They are listed in the accessory package. Final quantities and specifications must be confirmed in the quotation.
Are motor flight cases included?
Yes. The specified packing arrangement provides one case per motor and a case for the controller.
Can the system be installed outdoors?
The motor specification lists IP54 protection, but suitability for outdoor use depends on the complete electrical system, rigging arrangement, weather conditions and relevant engineering assessment.
Can the circular truss size be customized?
DragonStage can review alternative diameters and truss specifications according to project requirements.
DragonStage supplies aluminum truss systems, event rigging equipment and related components for professional lighting and event production.
For circular truss packages, we focus on coordinating the ring geometry, motor specifications, connection accessories and intended application.
Customers can request a defined truss and motor package based on the agreed technical specifications.
Looking for a 4.5m circular lighting truss with six electric chain hoists?
Contact DragonStage with your required diameter, lighting fixture arrangement, total equipment weight, venue location and available overhead attachment information.
Please also confirm the electrical supply, intended working height and destination country.
We can review the proposed package and prepare a quotation based on the agreed supply scope.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997