Gentry Aluminum Portable Stage Lighting Truss 12x6m
packing volume: 4cbm
packing weight: 450kg
| Item | Specification(squre truss) | Qty | |||||
| length(M) | main tube(MM) | size(MM) | |||||
| Beam | 3 | 50×3.0 | CS389×389 | 3 pcs | |||
| 2 | 50×3.0 | CS389×389 | 1 pcs | ||||
| 1 | 50×3.0 | CS389×389 | pcs | ||||
| 0.5 | 50×3.0 | CS289×289 | 2 pcs | ||||
| Pillar | 3 | 50×3.0 | CS289×289 | 2 pcs | |||
| 2 | 50×3.0 | CS289×289 | 2 pcs | ||||
| 1 | 50×3.0 | CS289×289 | 2 pcs | ||||
| 0.5 | 50×3.0 | CS289×289 | pcs | ||||
| Tower | Spigot Sleeve Block S | 2 pcs | |||||
| Steel Base S | 2 pcs | ||||||
| Top Section S | 2 pcs | ||||||
| Manual hoist,BA05 2Tons | 2 pcs | ||||||
| Spigot Hinge Section,Height 1m | 2 pcs | ||||||
| Fibre sling,BA04,2 tons 3m | 2 pcs | ||||||
| Long outrigger | 8 pcs | ||||||
| Truss Accessory | Conical coupler & Safrty clip & pin | whole set | |||||
A gantry lighting truss is a portable ground support structure consisting of two vertical towers connected by a horizontal truss beam. It provides a safe and efficient method of suspending stage lighting, banners, LED displays and lightweight production equipment without requiring permanent rigging points.
Compared with large roof truss systems, a gantry truss is quicker to assemble, easier to transport and ideal for temporary indoor and outdoor events.
This portable aluminum gantry truss system provides a maximum span of 12m with a structural height of 6m. The modular design allows different width and height combinations, making it suitable for concerts, exhibitions, festivals and corporate events.
The system uses a professional sleeve block lifting mechanism, enabling the horizontal beam to be raised safely after assembly.
Learn more about our complete engineering solutions:
https://www.dragontruss.com/engineering-solution.html
Width: 12m
Height: Up to 6m
Width: 3.5m to 12m
Height: 3m to 6m
389×389mm aluminum beam truss
289×289mm aluminum tower truss
Sleeve blocks
Manual 2-ton chain hoists
Steel bases
Hinged base sections
Long outriggers
Fiber slings
Complete conical couplers, pins and safety clips
Weight: 450kg
Volume: 4cbm
The sleeve block lifting system allows installers to assemble the structure at ground level before safely lifting the beam into position.
Learn more about installation methods:
https://www.dragontruss.com/Installation-Methodology-for-Modular-Stage-Truss-Scaffold-Systems.html
Different beam lengths and tower heights can be combined to create configurations suitable for various venues.
Understanding modular engineering:
https://www.dragontruss.com/Modular-System-Logic-for-Stage-Truss-Scaffold.html
The entire system is designed for repeated transportation and rapid assembly, making it ideal for touring productions and rental companies.
Ideal for supporting:
Moving head lights
PAR fixtures
LED wash lighting
Stage banners
https://www.dragontruss.com/Concert-Event.html
Suitable for:
Conferences
Product launches
Award ceremonies
Indoor presentations
The gantry frame can also be used as:
Entrance gateway
Registration area
Branding structure
https://www.dragontruss.com/Exhibition-Booth.html
With proper outriggers and ballast, the gantry system is suitable for temporary outdoor productions.
Application examples:
https://www.dragontruss.com/applications.html
Unlike fixed truss frames, gantry systems use sleeve blocks and manual hoists to raise the beam after assembly. This improves installation safety while reducing working at height.
The allowable load depends on:
Span length
Beam size
Tower height
Suspension point locations
Wind conditions
Load calculations should always be performed before installation.
https://www.dragontruss.com/load-analysis-for-modular-stage-systems.html
Long outriggers significantly improve stability by increasing the effective support footprint.
Where ground anchoring is not possible, ballast systems should be considered.
Safety recommendations:
https://www.dragontruss.com/safety-standards-engineering-constraints.html
The truss system is manufactured from high-strength structural aluminum alloys, providing excellent strength-to-weight performance and corrosion resistance.
Learn more:
Yes. Both span and tower height can be customized according to project requirements.
Yes, provided the structure is designed according to the required loading and wind conditions.
Yes. Proper outriggers, ballast or ground anchoring should be used depending on site conditions.
A gantry truss supports equipment using a simple two-tower structure, while a roof truss includes a complete roof framework capable of supporting larger lighting and weather protection systems.
Lighting Truss Systems
https://www.dragontruss.com/lighting-truss.html
Concert & Event Solutions
https://www.dragontruss.com/Concert-Event.html
Engineering Solutions
https://www.dragontruss.com/engineering-solution.html
Technical Support
https://www.dragontruss.com/Technical-Support.html
Dragon Stage manufactures modular aluminum truss systems for concerts, exhibitions, architectural structures and event productions worldwide. We provide engineering consultation, customized structural design and complete manufacturing services.
For project consultation:
https://www.dragontruss.com/contactus.html
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997