packing weight:50kg

packing volume:0.15cbm

dj table deck 2.2x0.8x0.1m 1p

square leg 0.9m 4p

Product Specifications

Built Like an Aluminum Stage Platform

The customer's requirement was very specific:

It should not be a full stage. It should be one mobile DJ table built like a professional aluminum stage platform.

This is an important distinction.

A conventional DJ table may use a furniture-style frame or folding stand. This product instead adopts the manufacturing logic of an aluminum Stage Platform, using a rigid framed working surface supported by aluminum legs.

This approach is suitable when the customer wants a DJ workstation that feels more like a piece of professional event equipment than temporary furniture.

The structure can therefore be customized according to:

• Required table width

• Working depth

• Operating height

• Surface material

• Leg arrangement

• Wheel configuration

• Cable access requirements

2200mm Wide Working Surface

The table provides a 2200mm × 800mm working area.

The customer normally uses:

• 2–4 DJ players

• 1 mixer

• Laptop

• Additional controller when required

The 800mm depth provides room for equipment placement while the 2200mm width gives flexibility for different DJ equipment combinations.

Because DJ equipment dimensions vary between brands and models, customers ordering a similar table can provide the exact equipment layout before production.

900mm Working Height

The requested finished height is 900mm.

Unlike a stage platform, where the height is primarily determined by audience visibility and event layout, the height of a DJ workstation directly affects the operator's working position.

For custom production, the table height can therefore be adjusted according to the customer's preferred standing position and equipment arrangement.

DragonTruss supports non-standard dimensions through our Custom Stage Production capability, including made-to-order aluminum platforms and special-purpose structures derived from standard stage manufacturing methods.

Four Lockable Caster Wheels

The customer wanted the complete DJ table to move approximately 1–2 meters inside the club without having to remove the equipment each time.

For this reason, the table is fitted with four strong lockable caster wheels.

The wheels provide two functions:

Mobility — the table can be repositioned over short distances inside the venue.

Position locking — once the table reaches its operating position, the caster brakes can be engaged to prevent normal rolling movement.

This is different from a portable stage platform that is normally assembled in one position and left stationary during use.

The caster size and specification should be selected according to the final table construction, equipment weight, floor condition, and intended use.

Flat Black DJ Working Surface

The top surface is designed to remain:

• Flat

• Black

• Clean in appearance

• Suitable for professional DJ equipment placement

The black finish visually integrates with DJ players, mixers, controllers, lighting equipment, and typical club interiors.

The exact top-board material and surface treatment can be confirmed according to the customer's requirements.

Open Rear Design for Cable Management

The rear of the table remains open.

This was a deliberate customer requirement rather than an unfinished part of the design.

An open rear provides easier access for:

• Power cables

• Audio cables

• Network cables

• Signal cables

• Equipment connections

• Temporary cable changes during operation

For a DJ workstation, easy rear access can be more practical than enclosing the table with a decorative back panel.

If required, cable holes, cable routing positions, or removable panels can also be incorporated into a customized version.

Why Use Stage Platform Construction for a DJ Table?

The customer's idea is essentially:

take the structural concept of an aluminum stage deck and reduce it into one dedicated DJ workstation.

This approach provides several practical advantages compared with a lightweight furniture-style DJ table:

• Aluminum structural frame

• Large custom working surface

• Fixed professional working height

• Replaceable legs or wheels

• Easy customization

• Suitable for repeated venue use

• Can be manufactured around actual DJ equipment dimensions

It also demonstrates an important part of DragonTruss manufacturing: standard stage components and manufacturing methods do not have to remain limited to conventional stages.

They can be adapted into special-purpose products when the customer's application requires it.

Custom Manufacturing Options

Similar DJ tables can be customized in different configurations.

Possible changes include:

• Different overall width

• Different depth

• Different working height

• Fixed legs instead of wheels

• Lockable caster wheels

• Additional center support

• Cable holes

• Open or partially enclosed rear

• Different top finishes

• Custom aluminum frame configuration

Customers can send a simple drawing, reference photo, equipment dimensions, or even a hand sketch.

For non-standard aluminum stage-derived products, see Custom Stage Production.

Practical Design Information Required Before Production

For a customized mobile DJ table, the most useful information is:

• Required width, depth, and height

• DJ player models or dimensions

• Mixer dimensions

• Other equipment to be placed on the table

• Approximate total equipment weight

• Required wheel type

• Indoor or outdoor use

• Cable routing requirements

• Whether front or side panels are required

These details help determine the final manufacturing configuration rather than simply scaling an existing table.

Important Load Note

This product is intended to carry typical DJ equipment such as players, a mixer, laptop, and controller according to the customer's stated use.

However, no verified load capacity has been provided for this particular configuration, so the product page should not state a specific kilogram load rating.

If a customer has unusually heavy equipment or requires a verified load capacity, the equipment weight and final structural configuration should be confirmed separately.

For general practical questions about aluminum stage structures and their use, see our Aluminum Stage FAQ.

FAQ

Is this a DJ booth or a stage platform?

It is a custom DJ table manufactured using aluminum stage-platform construction principles. It is intended as one standalone workstation rather than a complete stage.

What is the size of this mobile DJ table?

The customized size shown here is 2200mm wide × 800mm deep × 900mm high.

Can the table be moved with DJ equipment on top?

The table is designed with four lockable caster wheels for short-distance repositioning inside the venue. Actual operating practice should consider the equipment arrangement, total weight, floor condition, and wheel specification.

Why is the back left open?

The customer specifically requested an open back so power, audio, and signal cables remain easy to connect and manage.

Can the dimensions be customized?

Yes. Width, depth, height, surface configuration, wheel arrangement, and cable-management details can be manufactured according to the customer's requirements.

Can fixed legs be used instead of caster wheels?

Yes. The support arrangement can be customized according to whether the table needs to remain stationary or be moved regularly.