packing weight:400kg

packing volume:1cbm

Product Information

Product Description

8m Ringlock Line Array Support Tower for Concerts

The DragonStage 8m Ringlock Line Array Tower is a modular scaffold-based support structure intended for suspended speaker systems at concerts, music festivals and live event productions.

The tower combines three important elements: a tall diagonal-braced framework, a sloped upper rain canopy and a ballast placement platform at ground level.

The rear of the structure reaches 8m, while the front rises to 9m, forming a sloped roof arrangement above the upper tower section.

Unlike a camera tower or a scaffold access tower, this configuration is intended primarily for supporting a concert line array suspension arrangement rather than providing elevated working platforms for personnel.

The lower platform is dedicated to the proposed ballast arrangement, which must be established according to the actual installation conditions and verified structural design.

Why This Configuration?

1. Dedicated Line Array Tower

Concert line array systems often require independent support positions located beside or around the main stage.

A separate speaker tower allows the sound-system layout to be considered independently of the main stage roof structure.

The required hanging elevation, speaker orientation and suspension hardware depend on the specific sound system and event layout.

DragonStage also supplies related Speaker & Line Array Truss configurations for different concert production requirements.

2. Sloped Rain Canopy — 9m Front and 8m Rear

The upper section of the tower includes a sloped canopy, with the front reaching 9m and the rear reaching 8m.

This creates a one-directional roof slope above the upper structural area.

The canopy is intended to provide weather shielding for the upper tower area. Its actual rain protection, drainage, attachment method and wind resistance depend on the final canopy specification.

The presence of a canopy does not establish that the suspended speaker equipment is fully protected from rain.

3. Bottom Ballast Placement Platform

One distinctive feature of this tower is the platform at its base.

The platform is intended to accommodate the ballast arrangement required for the particular installation.

Rather than placing ballast directly on an unspecified ground area, the design provides a dedicated structural location where the proposed ballast system can be considered.

The platform itself does not determine the ballast weight or prove the tower's stability.

The ballast quantity, placement, restraint, ground-bearing requirements and overall stability must be established by the project-specific structural design.

4. Diagonal-Braced Ringlock Structure

The main tower is assembled from modular scaffold components incorporating vertical standards, horizontal ledgers and diagonal braces.

The diagonal bracing forms triangulated bays along the height of the tower.

This configuration is intended to provide a braced structural arrangement for the line array support system, subject to verification of the complete tower geometry and applied loads.

Related modular components and configurations can be found in DragonStage's Ringlock Structure System category.

5. Modular Construction for Event Projects

The ringlock structure is assembled from repeatable scaffold components, allowing project configurations to be developed around the required height, footprint and support arrangement.

For rental companies and concert contractors, modular construction can also simplify component handling and replacement compared with a completely welded one-piece tower.

Changes to the tower dimensions, hanging arrangement or canopy configuration require appropriate structural review.

Main Structural Components

Ringlock Vertical Standards

Vertical structural members form the main height of the support tower.

Horizontal Ledgers

Horizontal members connect the vertical standards and establish the modular tower bays.

Diagonal Braces

Diagonal braces are distributed throughout the structure to form the intended braced framework.

Sloped Rain Canopy

An upper canopy is arranged between the 9m front and 8m rear elevations.

Bottom Ballast Platform

A lower structural platform provides the intended location for the project's ballast arrangement.

Base Support Components

Base supports are provided at the bottom of the structure. Their final configuration must be matched to the ground conditions and project requirements.

Line Array Suspension Arrangement

The tower is intended for a suspended line array application. The exact hanging beam, rigging point, hoist and connection details must be confirmed before production.

Typical Applications

Outdoor Concert Line Array Support

Independent speaker tower positions beside concert stages.

Music Festival Sound Systems

Temporary line array support positions for festival sound production layouts.

Large Outdoor Event Productions

Modular tower structures for projects requiring elevated speaker suspension.

Touring and Rental Event Equipment

Reusable modular tower components that can be incorporated into different project configurations following suitable engineering assessment.

Stage-Side Speaker Support

Separate speaker support positions where the main stage structure is not intended to carry the additional speaker loads.

Line Array Tower vs. Camera Tower

Although both structures can use modular scaffold construction, their functions are different.

A camera tower is generally arranged around personnel access, elevated working platforms and camera sightlines.

This line array tower is intended primarily for suspended speaker equipment. Its bottom platform serves the proposed ballast arrangement rather than an elevated camera operating position.

The tower should therefore be selected according to the sound-system layout and structural requirements, not simply by its height.

Installation and Selection Notes

Before selecting this tower, customers should confirm the speaker model, total suspended equipment weight, required hanging elevation and intended suspension method.

For outdoor applications, the site conditions are particularly important.

The engineering assessment should address wind actions, overturning stability, ballast arrangements, tower connections, ground-bearing conditions and the complete rigging configuration.

The canopy must also be considered as part of the structural system because its geometry and surface area affect the forces acting on the tower.

For general installation principles, see Installation Methodology for Modular Stage, Truss and Scaffold Systems.

Important Engineering Note

The product information confirms the intended concert line array application, modular tower configuration, 8m rear height, 9m front height, sloped canopy and bottom ballast platform.

It does not establish the allowable suspended load, maximum permitted wind speed, required ballast weight, ground-bearing capacity, anchoring method or approved rigging arrangement.

These parameters must be established through engineering verification for the actual project.

FAQ

What is this 8m Ringlock Line Array Tower used for?

It is intended as a modular support structure for suspended concert line array speaker systems.

Why is the front 9m high while the rear is 8m?

The different heights create a sloped upper canopy. The front reaches 9m, while the rear reaches 8m.

Does the tower include a rain canopy?

Yes. The illustrated configuration includes a sloped canopy. Its material, weather protection performance and attachment details require confirmation.

What is the purpose of the bottom platform?

The bottom platform is intended for ballast placement. The required ballast arrangement must be determined for the actual project.

How much ballast is required?

There is no universal ballast weight for this configuration. The amount depends on the overall geometry, environmental actions, suspended equipment and site conditions.

Does the product include speakers or chain hoists?

The supplied information does not confirm speakers, chain hoists or a complete rigging package as part of the structure. These items should be specified separately in the quotation.

Can the tower be customized?

DragonStage can review alternative heights, footprints and configurations according to project requirements, subject to suitable structural verification.

Is this tower suitable for outdoor use?

The configuration is intended for consideration in outdoor concert applications. Actual outdoor use requires verification of wind, stability, ground conditions and the complete installation arrangement.

Why Choose DragonStage?

DragonStage manufactures and supplies modular truss, stage and scaffold-based event structures.

Our product range includes concert support towers, speaker truss systems, stage platforms and customized temporary event configurations.

For line array support structures, we work with the customer's required height, speaker layout, installation environment and project requirements to define the proposed supply configuration.

Request a Quotation

Need a Ringlock Line Array Tower for an upcoming concert or festival?

Send DragonStage your required tower height, speaker system details, hanging arrangement, project location and destination country.

We can review the proposed configuration and prepare a quotation based on the agreed product scope.