What do you check in scaffolding?

What do you check in scaffolding?

check and accept completed scaffolding standards.

After the erection and assembly of the scaffolding, the operation can be carried out only after the inspection and acceptance confirmation.The acceptance shall be organized by the competent leader, shelf team leader and full-time safety technicians layer by layer and flow section, and fill in the acceptance sheet.The acceptance requirements are as follows: 

1. The foundation treatment, practice and embedding depth of the scaffolding must be correct and reliable.

2. The layout, erection bar and size horizontal bar spacing of the shelves shall meet the requirements.

3. Installation and assembly of shelves, including tool racks and key points selection shall meet the requirements.

4. The wall point or fixed part with the structure shall be safe and reliable; scissors and inclined support shall meet the requirements.

5. The safety protection and safety insurance device of scaffolding shall be effective; the tightening degree of fasteners and binding shall meet the regulations.

6. The installation of crane tools, wire rope and boom of scaffold shall be safe and reliable, and the laying of scaffold board shall comply with the regulations.