The Plywood Stacking Strip for 290mm Stage Truss is a practical storage and handling accessory designed to help protect stage truss sections during stacking, transportation, storage, and production preparation.
Designed specifically for 290mm stage truss, this plywood stacking strip provides a dedicated contact surface between stacked truss sections. It helps reduce direct contact between truss components, making it easier to organize and handle truss during repeated event setup and dismantling.
The product is particularly useful for professional production environments where stage truss is frequently transported, stacked, stored, and reused. The original product information highlights three main benefits: damage prevention, efficiency gains, and safety improvements.
The standard design is optimized for 290mm stage truss, while custom stacking rails can also be manufactured for other lighting truss sizes when a section drawing is provided.
If you are building or maintaining a complete truss inventory, browse Truss & Rigging for related truss systems and Truss & Rigging Accessories for additional truss accessories.
This stacking strip is specifically designed for 290mm stage truss, providing a suitable stacking interface for the corresponding truss profile.
The plywood strip creates a separation layer between stacked truss sections, helping reduce direct contact and the risk of unnecessary surface damage during storage and handling.
Organizing truss with dedicated stacking strips can make repeated loading, unloading, stacking, and inventory management more efficient in professional production environments.
A properly organized stacking arrangement can help keep truss sections more stable and easier to manage during storage and preparation.
The manufacturer can produce stacking rails for other lighting truss sizes when a section drawing is provided. This allows the stacking strip to be matched to a specific truss profile rather than relying on a universal design.
Specification | Details |
|---|---|
Product Name | 290mm Stage Truss Plywood Stacking Strip |
Alternative Name | Plywood Traverse Stacking Rail |
Product Type | Truss Stacking / Storage Accessory |
Application | Stage truss stacking, storage and handling |
Compatible Truss Size | 290mm stage truss |
Material | Plywood |
Design | Profile-specific stacking strip |
Customization | Available for other truss sizes based on section drawing |
Brand | Dragon Stage |
This plywood stacking strip is suitable for professional environments where stage truss is repeatedly handled or stored, including:
Festival structures
Concert production
Outdoor event production
Stage equipment storage
Lighting truss storage
Event production warehouses
Truss transportation and loading
Rental company truss inventories
Repeated setup and dismantling operations
For festival and touring production companies, a dedicated stacking solution can be particularly useful when the same truss inventory is loaded, transported, unloaded, and stored repeatedly.
Stacking aluminum truss directly against another truss can create unnecessary contact points. A suitable plywood strip provides a separation layer between adjacent sections.
A dedicated stacking rail helps create a more consistent stacking arrangement, which can make warehouse and production-area organization easier.
When truss sections are stored in a consistent configuration, loading and unloading operations can become easier to repeat.
Reducing unnecessary contact during stacking can help minimize avoidable surface damage and wear over repeated handling cycles.
The original product information specifically positions the stacking strips as an investment for professional production environments because of their potential benefits in damage prevention, efficiency gains, and safety improvements.
The standard product is optimized for 290mm stage truss, but the manufacturer also supports custom production for other lighting truss sizes.
If your truss does not match the standard 290mm profile, provide a section drawing of the truss.
The drawing can be used to determine the required profile and develop a custom-fit plywood stacking strip. The source product page specifically states that providing a section drawing is sufficient to initiate the design and fabrication of a custom-fit stacking strip.
For a custom stacking rail, provide:
Truss section drawing
Overall truss profile dimensions
Contact or support area where the strip will sit
Required strip length, if known
Intended stacking arrangement
Required quantity
If you do not have a formal CAD drawing, clear dimensional photos or measured sketches may help with the initial discussion, but the final design should be confirmed against the actual truss profile.
This product is an accessory for truss storage and handling rather than a complete truss system.
Depending on your application, you may also need:
Compatible stage or lighting truss
Appropriate transportation equipment
Storage or loading equipment
Additional stacking accessories for larger inventories
If you are selecting the truss itself, start with Truss & Rigging.
For additional truss-related components, visit Truss & Rigging Accessories.
The required quantity depends on:
Number of truss sections being stacked
Length and profile of the truss
Stacking configuration
Storage method
Transportation requirements
For a small inventory, calculate the number of strips needed based on the planned stacking arrangement.
For a larger rental or production inventory, it is better to determine the quantity from the actual storage and loading workflow rather than ordering solely according to the number of truss pieces.
If you provide the number of truss sections and your stacking arrangement, the required quantity can be evaluated before ordering.
Before ordering, confirm that your truss profile matches the intended stacking strip.
For the standard product:
Compatible truss size: 290mm stage truss.
If your truss is another size, do not assume that the standard strip will fit correctly. The manufacturer can produce custom stacking rails when you provide the truss section drawing.
A stacking strip needs to match the contact area of the truss. Similar-looking truss sections can have different profiles.
The nominal size is an important reference, but the actual section profile should still be confirmed when fit is critical.
For a custom product, provide a clear section drawing whenever possible. This gives the manufacturer the information needed to develop a profile-specific solution.
This product is a storage and handling accessory. It is not intended to replace truss connectors or structural components.
The required quantity depends on the stacking arrangement and contact points, not simply the total length of truss in your inventory.
Use the stacking strip as part of a stable and organized truss storage arrangement.
Before moving a stack:
Check that the truss sections are properly positioned.
Make sure the stack is stable.
Avoid unstable or excessive stacking.
Use suitable lifting and handling equipment where required.
Follow the applicable site and transportation safety procedures.
The stacking strip helps organize and separate truss sections, but it does not by itself determine the safe stacking height, transport method, or lifting capacity of a complete storage arrangement.
The standard product is designed for 290mm stage truss.
The product is a plywood stacking strip designed for stage truss storage and handling.
It provides a separation layer between stacked truss sections, helping reduce direct contact, improve organization, and make storage and handling more efficient.
Yes. The source product information states that custom stacking rails can be produced for other lighting truss sizes when a section drawing is provided.
A truss section drawing is the preferred starting point. It allows the stacking rail to be designed around the actual truss profile.
No. This is a truss stacking, storage, and handling accessory. It should not be treated as a structural truss component or as a replacement for a truss connector.
Yes, it can be used in festival and event production environments where compatible stage truss needs to be stacked, stored, transported, or prepared for repeated use.
There is no universal quantity. The required number depends on the number of truss sections, their length, the stacking arrangement, and the desired support/contact points.
Need a plywood stacking strip for 290mm stage truss?
For the standard 290mm version, send us your required quantity and truss configuration.
If you use another truss size or have a special profile, send us the truss section drawing. We can develop a custom stacking rail based on the actual truss profile.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997