The M290 M390 F44 F34 Truss Structural Transport Vehicle is an aluminum truss transportation trolley designed for compatible M290, M390, F34, and F44 series aluminum truss structures.
It is designed to make truss handling, positioning, and short-distance transportation easier during exhibition setup, event production, warehouse operations, and repeated installation work. The vehicle features four casters with brakes, a rubber support bracket, and a belt fixing position to help keep the truss properly supported and secured during handling. The manufacturer's specifications state a 90 kg load capacity, with overall dimensions of 800 × 600 × 200 mm and a product weight of 10.10 kg.
The transport vehicle is particularly useful when aluminum truss sections need to be moved repeatedly between storage areas, loading zones, exhibition halls, workshops, or installation locations.
For exhibition projects requiring temporary structural systems, explore Structural Support Solutions for Exhibitions & Brand Events. For broader truss system requirements, Truss & Rigging provides a starting point for compatible truss solutions.
Designed for:
M290 aluminum truss
M390 aluminum truss
F34 aluminum truss
F44 aluminum truss
The source product page specifically identifies these four truss series as the intended application.
The vehicle uses four casters with brakes, allowing the trolley to be positioned and held in place during staging and preparation. The stated load capacity is 90 kg.
The transport vehicle is specified as being made from aluminum, providing a lightweight material solution for a mobile truss handling accessory.
A rubber bracket provides the contact/support area between the vehicle and the truss, helping accommodate the truss during handling.
The integrated belt fixing position provides a designated point for securing the truss during movement.
With dimensions of 800 × 600 × 200 mm, the vehicle is designed as a relatively compact handling accessory for truss transportation and positioning.
Specification | Details |
|---|---|
Product Name | M290 M390 F44 F34 Truss Structural Transport Vehicle |
Product Type | Truss Transport Vehicle / Truss Dolly |
Compatible Truss Series | M290, M390, F34, F44 |
Material | Aluminum |
Casters | 4 casters with brakes |
Load Capacity | 90 kg |
Support | Rubber bracket |
Securing Feature | Belt fixing position |
Dimensions (L × W × H) | 800 × 600 × 200 mm |
Product Weight | 10.10 kg |
Application | Truss transportation, handling and positioning |
Product Category | Typical Truss System Accessories |
For exhibition systems, aluminum truss sections often need to be moved repeatedly during booth construction and dismantling.
This trolley can help production teams move compatible truss components around the exhibition hall or workshop before final assembly.
For larger exhibition projects, the related Structural Support Solutions for Exhibitions & Brand Events application page provides additional context.
Event production teams can use the transport vehicle when preparing truss for temporary structures, lighting support, display systems, and related installations.
The compact dimensions and four-wheel configuration make the trolley useful for moving compatible truss sections within storage or production areas.
The trolley can assist with moving truss between storage locations and loading areas, reducing the need to manually carry individual sections.
Rental and event production companies can benefit from a dedicated handling accessory when the same truss inventory is assembled and dismantled repeatedly.
Before ordering, confirm that your truss belongs to one of the following supported series:
M290 / M390 / F34 / F44
The product page does not state that this trolley is universally compatible with every 290 mm, 390 mm, F34, or F44-looking truss from every manufacturer.
For best results, confirm the actual truss series and profile before purchase.
If you are unsure, provide:
Truss model
Truss dimensions
Truss section drawing
Photos of the truss profile
This is especially important when the trolley will be used with a non-standard or modified truss system.
The stated load capacity of this transport vehicle is:
90 kg
This is the manufacturer's specified load for the transport vehicle.
The 90 kg rating should not be interpreted as the structural load capacity of the truss itself.
When transporting truss, consider the total weight being placed on the trolley, including any additional components that remain attached to the truss.
Do not exceed the specified transport vehicle load capacity.
A typical handling workflow is:
Position the transport vehicle on a suitable, reasonably level surface.
Place the compatible truss section onto the rubber support bracket.
Check that the truss is seated correctly.
Use the belt fixing position when additional securing is required.
Release the caster brakes before moving.
Move the truss carefully to the required location.
Engage the caster brakes when the vehicle is positioned for staging or preparation.
Before lifting or assembling the truss into its final configuration, remove the transport vehicle as required.
The exact handling procedure should be adapted to the truss size, weight, site conditions, and project workflow.
The four casters are equipped with brakes.
The brakes are useful when the trolley needs to remain stationary during:
Truss positioning
Preparation before assembly
Temporary staging
Loading preparation
Workshop operations
The brakes should not be treated as a substitute for securing a truss during vehicle transportation or for preventing movement on unsuitable surfaces.
Always consider the site conditions and the stability of the complete load.
The product includes a belt fixing position.
This feature can be used as part of the process of securing the truss to the trolley during movement.
When using a securing belt:
Use an appropriate belt for the load.
Make sure the belt is correctly positioned.
Avoid damaging the truss surface.
Check that the truss is properly seated before moving.
Recheck the load after moving over uneven surfaces.
The supplied product information confirms the presence of the belt fixing position but does not specify a belt type, belt length, belt capacity, or whether a belt is included in the standard package.
For basic use, you need:
Compatible M290, M390, F34, or F44 aluminum truss
The transport vehicle
Appropriate securing method when required
Depending on the project, additional handling or installation equipment may be necessary.
For a complete truss system, explore Truss & Rigging.
Depending on your production workflow, you may also require:
Additional truss transportation equipment
Truss storage accessories
Compatible truss connectors
Truss stacking solutions
Loading and unloading equipment
Protective transport equipment
For related accessories, visit Truss & Rigging Accessories.
The required quantity depends on how the truss is handled.
One transport vehicle may be selected according to the intended handling configuration and load.
Multiple vehicles may be useful when several truss sections need to be prepared or moved simultaneously.
Quantity should be based on the number of truss sections being moved, the installation workflow, and the available handling personnel.
Do not determine quantity solely from the total length of truss.
A truss trolley may look suitable while having a different support geometry.
Always confirm compatibility with the actual truss series.
The specified load capacity is 90 kg. Do not exceed it.
The trolley's 90 kg capacity applies to the transport accessory. It does not define the load capacity of M290, M390, F34, or F44 truss structures.
The trolley includes a belt fixing position, but the source information does not indicate that a belt is included. Confirm the securing arrangement before movement.
This product is a transport and handling vehicle. It is not a permanent structural support component.
When the trolley is not in use:
Store it on a stable surface.
Keep the casters and brakes free of excessive debris.
Check the rubber support area periodically.
Inspect the securing point before repeated use.
Avoid loading the trolley beyond the specified 90 kg capacity.
Before each major production job, inspect the trolley for visible damage or abnormal caster operation.
The product is specified for M290, M390, F34, and F44 series aluminum truss structures.
The specified load capacity is 90 kg.
The main material is aluminum.
Yes. It uses four casters with brakes.
The overall dimensions are:
800 × 600 × 200 mm (L × W × H).
The stated product weight is 10.10 kg.
The product has a belt fixing position, but the supplied information does not confirm that a belt is included in the standard package. Confirm the package contents before ordering.
Yes. It is suitable for moving compatible aluminum truss during exhibition setup and dismantling. For exhibition-specific structural applications, see Structural Support Solutions for Exhibitions & Brand Events.
No. It is a transport and handling accessory. It should be removed or positioned appropriately before the truss becomes part of its final structural configuration.
Compatibility should be confirmed before purchase. The supplied product information identifies the supported series but does not provide a universal cross-manufacturer compatibility statement.
Need to move M290, M390, F34, or F44 aluminum truss more efficiently?
This transport vehicle provides a compact handling solution with four braked casters, a rubber support bracket, belt fixing position, 90 kg load capacity, and an 800 × 600 × 200 mm footprint.
Before ordering, send us your truss model or section dimensions so we can confirm compatibility.
For exhibition applications, explore Structural Support Solutions for Exhibitions & Brand Events. For complete truss solutions, visit Truss & Rigging.
content is empty!
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997