18x8x8m Professional Aluminum Lighting Roof Truss System

18x8x8m Professional Aluminum A-Frame Lighting Roof Truss System with Side Wings

Short Description

The DragonStage 18x8x8m Professional Aluminum Lighting Roof Truss System is a large modular outdoor event structure designed for concerts, festivals, and live-production applications. The main roof frame spans approximately 18m wide × 8m deep × 8m high, using CS500×600 main beams, CS389×389 lifting towers, and a pitched roof built from CS289×289 roof truss and ladder truss. Side wing structures are also included for auxiliary sound, LED, or production equipment according to the final project layout. 

This Professional 18m x 8m Aluminum Lighting Roof Truss System is a premier structural solution designed for headline concert acts and large-scale festival environments. Reaching a 12,000mm width across the main span and an 8,000mm vertical elevation, this system provides a comprehensive, high-capacity rigging environment for complex lighting, massive LED screens, and professional audio arrays.

The DragonStage 18x8x8m Professional Aluminum Lighting Roof Truss System is designed for large temporary event productions that require a wide covered performance area together with dedicated positions for lighting, sound, LED, and other production equipment.

The primary roof rectangle is formed by 18m front beams and 8m side beams using heavy-section CS500×600 square aluminum truss. Four CS389×389 ground-support towers carry and raise the main roof structure through sleeve blocks, bases, top sections, manual hoists, hinge sections, fiber slings, and outriggers. Dragon Stage

For customers comparing other large event roof systems, see Roof Truss and Typical A-frame Roof Truss System.

packing weight:3380kg

packing volume:40cbm

Item		Specification(squre truss)						Qty
		length			main tube(mm)		size(mm)
18.00 m Beam(front)	2 sets	3.00 m			50×3.0		CS500×600	12pcs
		2.00 m			50×3.0		CS500×600	0pcs
		1.00 m			50×3.0		CS500×600	0pcs
8.00 m Beam(side)	2 sets	3.00 m			50×3.0		CS500×600	4pcs
		2.00 m			50×3.0		CS500×600	2pcs
		1.00 m			50×3.0		CS500×600	0pcs
7.00 m Pillar	4 sets	3.00 m			50×3.0		CS389×389	8pcs
		2.00 m			50×3.0		CS389×389	0pcs
		1.00 m			50×3.0		CS389×389	4pcs
beam cube	6 faces	CS500×600						0pcs
Frame Tower	Spigot Sleeve Block M							4pcs
	Steel Base M							4pcs
	Top Section M							4pcs
	Manual hoist,BA05 2Tons							4pcs
	Spigot Hinge Section,Height 1m							4pcs
	Fibre sling,BA04,2 tons 3m							4pcs
	Long outrigger							16pcs
Item		Specification(squre truss)						Qty
		length			main tube(mm)		size(mm)
Roof Pillar	2 sets	1.80 m			50×3.0		CS289×289	2pcs
8.00 m Top Beam	1 sets	3.00 m			50×3.0		CS289×289	2pcs
		2.00 m			50×3.0		CS289×289	1pcs
		1.00 m			50×3.0		CS289×289	0pcs
9.20 m Oblique Beam	4 sets	3.00 m			50×3.0		CS289×289	8pcs
		2.00 m			50×3.0		CS289×289	4pcs
		1.20 m			50×3.0		CS289×289	4pcs
9.20 m Ladder truss	6 sets	3.00 m			50×3.0		CL30,289*50	12pcs
		2.00 m			50×3.0		CL30,289*50	6pcs
		1.20 m			50×3.0		CL30,289*50	6pcs
Roof Components	4	roof conner 4 ways, use for roof beam truss					CS289×289	2pcs
	5	roof conner 5 ways, use for roof beam truss					CS289×289	0pcs
	1	Connect plate with clamp					CS289×289	2pcs
		Single clamp						12pcs
		Double clamp						8pcs
		roof canopy material:pvc, Blue Colour or customized.					266.96	1pcs
Item		Specification(squre truss)						Qty
		length			main tube(mm)		size(mm)
4.00 m Wings Beam	4 sets	3.00 m			50×3.0		CS500×600	4pcs
		2.00 m			50×3.0		CS500×600	0pcs
		1.00 m			50×3.0		CS500×600	4pcs
7.00 m Wings Pillar	4 sets	3.00 m			50×3.0		CS389×389	8pcs
		2.00 m			50×3.0		CS389×389	0pcs
		1.00 m			50×3.0		CS389×389	4pcs
Wings Tower	Spigot Sleeve Block M							4pcs
	Steel Base M							4pcs
	Top Section M							4pcs
	Manual hoist,BA05 2Tons							4pcs
	Spigot Hinge Section,Height 1m							4pcs
	Fibre sling,BA04,2 tons 3m							4pcs
	Long outrigger							16pcs
Truss Accessory		Conical coupler & Safrty clip & pin						whole set

Main Features

• Approx. 18m × 8m × 8m main event structure

• Large CS500×600 main beam system

• Four CS389×389 ground-support lifting towers

• Four 2-ton manual hoists for the main roof

• A-frame / pitched roof profile

• CS289×289 roof framing

• CL30 ladder roof members

• PVC roof canopy

• Separate side wing support structures

• Additional wing lifting towers and hoists

• Modular aluminum truss construction

• Designed for repeated event assembly and dismantling

• Customizable according to production requirements

Typical Applications

• Large outdoor concerts

• Music festivals

• Touring productions

• Public performances

• Church crusades

• Large ceremonies

• Corporate events

• Festival main stages

• Temporary lighting and sound structures

Packing Information

The current product page lists:

• Packing weight: approximately 3380kg

• Packing volume: approximately 40cbm Dragon Stage

These values are useful for early freight planning, although final packing data should still be confirmed against the final ordered configuration.

Stage Platform Note

The current published BOM defines the roof truss, wing structures, lifting systems, canopy, and accessories, but does not provide a confirmed matching stage-platform BOQ.

Therefore, this product page should not automatically state that a stage deck is included.

If a platform is required, a matching stage can be configured separately according to:

• stage width

• stage depth

• stage height

• stair quantity

• guardrails

• access requirements

See Stage Platform for related systems.

Installation Logic

Because this is a ground-support roof structure, the main roof grid can be assembled at a lower working level before being raised along the towers using the lifting system.

For general assembly methodology rather than project-specific erection instructions, see Installation Methodology for Modular Stage, Truss & Scaffold Systems.

Important Technical Note

The current product page confirms the physical dimensions, truss types, component quantities, manual hoists, wing structures, and roof canopy.

It does not establish a universal value for:

• allowable roof load

• allowable lighting load

• allowable LED load

• allowable speaker load

• wind resistance

• ballast requirement

• anchoring requirement

• safety factor

• project-specific engineering approval

The original page currently uses phrases such as “heavy-duty structural load capacity,” but without a published load table or project calculation, that wording should not be used as a numerical or engineering conclusion. Dragon Stage

For this distinction, see Safety Standards & Engineering Constraints.

FAQ

What is the overall size of this roof truss system?
The main structure is approximately 18m wide × 8m deep × 8m high.

What truss is used for the main 18m beams?
The main front beams use CS500×600 aluminum square truss with 50×3.0mm main tubes. Dragon Stage

What truss is used for the towers?
The main towers and wing towers use CS389×389 aluminum square truss. Dragon Stage

What truss is used for the roof?
The pitched roof uses CS289×289 square truss together with CL30 ladder truss. Dragon Stage

How many main lifting towers are included?
The main roof uses 4 lifting towers.

How many manual hoists are included for the main roof?
The main roof includes 4 manual 2-ton hoists. Dragon Stage

Does the system include side wings?
Yes. The current configuration includes separate side wing structures using 4m CS500×600 beams and CS389×389 towers. Dragon Stage

Does each wing have its own lifting system?
Yes. The wing structures have their own sleeve blocks, bases, top sections, manual hoists, hinge sections, fibre slings, and outriggers. Dragon Stage

Is the roof canopy included?
Yes. The current BOM includes a PVC roof canopy, with blue listed as the standard color and customization available. Dragon Stage

Is the stage platform included?
The current published BOM does not clearly include a stage-platform system, so it should be confirmed separately.

Can line arrays or LED screens be installed on the wings?
The wing structures can be used as auxiliary support positions, but the actual equipment weight, hanging points, and allowable configuration must be confirmed according to the project.

Can the size be customized?
Yes. Width, depth, height, wing size, roof geometry, and complete production layout can be customized.

What information do you need for quotation?
Please provide the required roof dimensions, event location, speaker model and quantity, LED screen size and weight, lighting equipment, indoor/outdoor use, canopy requirement, and whether a stage platform is needed.

Why Choose DragonStage

DragonStage supplies individual Lighting Truss components as well as complete large Roof Truss systems.

For a project of this scale, the practical question is not only “How large is the roof?”

The roof span, tower height, wing configuration, audio system, LED screens, lighting layout, canopy, installation environment, and stage platform should be treated as one coordinated event-production system.

Soft CTA

For quotation, please send us:

• required roof width × depth × height

• event location

• indoor or outdoor use

• line array model and quantity

• LED screen dimensions and weight

• lighting fixture quantity and approximate weight

• canopy requirement

• stage platform requirement

• preferred wing configuration

We can then confirm the suitable truss combination and component list.